User manual SAMSUNG MAX-B420

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-B420/B450 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak. For details on the Preset function, see the "Selecting a Stored Station" on page 14. 2, 3, 4, 7 8 1 6 6 5 Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the FM stereo or mono mode by pressing Mono/ST. on the remote control. 6 1 2, 3, 4, 7 5 8 2, 3 1 6 5 6 6 4 4 6 4 13 Searching for and Storing the Radio Stations (continued) GB Selecting a Stored Station You can listen to a stored radio station as follows: 7 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a programme number between 1 and 15. c Press Program to store the radio station. Result: PRGM is no longer displayed and the station is stored. 1 2 3 4 5 Switch the system on by pressing Standby/on. Select the TUNER function by pressing Tuner . Select the required frequency band by pressing Tuner (Band) on the remote control or TUNER (Band) again on the front panel. Press button on the front panel of the unit, or the Tuning / Mode button on the remote control until "PRESET" is displayed. Press on the front panel of the unit to select the desired / station. or Select the desired station by pressing the station number stored, using the Tuning or button on the remote control. Result: The desired station is now received. 8 To store any other radio frequencies required, repeat Steps 3 to 8. The PROGRAM function can be used to assign a new station to an existing programme number. 7 7 1 7 5 4 5 2, 3 In Tuner Mode In manual tuning mode, you can use search a radio station. In Preset tuning mode, you can use stored radio station. / button to manual button to stop auto search/ button to search a Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press Mono/ST. on the remote control to switch from stereo mode to mono. The quality of the sound will be improved. 14 About RDS broadcasting This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc. ) to be received from the FM RDS station together with normal radio signal. About RDS DISPLAY function GB About "PS NAME" MODE Displays the name of broadcasting station. 1 2 Press the Standby/On button. See the radio receiving method on the page 13. FM and frequency are shown on the display If the received station transfers the RDS information, 'RDS' appears automatically on the display. Press the RDS Display button to select the desired RDS mode. Whenever the button is pressed, RDS mode changes as follows. [. . . ] · The laser sensor is dirty or dusty. · The system has not been installed on a flat, horizontal surface. · Condensation has formed in the player; leave the system in a warm, airy room for at least one hour. · The TAPE function has not been selected. [. . . ]