User manual SAMSUNG MAX-DT99

[. . . ] 3 DVD MINI COMPONENT SYSTEM WITH USB HOST THIS APPLIANCE IS MANUFACTURED BY: DVD/VCD/CD/MP3-CD/CD-R/RW PLAYBACK MAX-DT99 Instruction Manual COMPACT COMPACT DIGITAL AUDIO DIGITAL VIDEO AH68-01849B Safety Warnings CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUCT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Precautions PREPARATION Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Press RETURN button to return to the previous level. Press CANCEL button to cancel the error numeric when you inputting password. 41 Press MENU button to exit the setup screen. Press MENU button to exit the setup screen. 42 Setting the Wallpaper Setting the Wallpaper JPEG DVD VCD While watching a DVD, , VCD or JPEG CD, you can set the image you like as a wallpaper. To Change the Wallpaper Press LOGO button. 1 During playback, press PLAY/PAUSE button when the image you like comes up. 2 1 Press MENU button. 2 Press Cursor button to move to `Setup' and then press ENTER button. 3 Press Cursor button to move to `LOGO' and then press ENTER button. · "COPY LOGO DATA" will be displayed on the TV screen. COPY LOGO DATA PAUSE SETUP Note · The selected wallpaper will be displayed. · You can repeat Steps 1 and 2 to set up to 3 wallpapers. · The power will turn off and turn on automatically and back on the display mode. 4 Press to select the desired `USER', and then press ENTER. 5 Press MENU button to exit the setup screen. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. Select this to set the Samsung Logo image as your wallpaper. Select this to set the desired image as your wallpaper. 43 44 DVD Playback Mode Some DVD-Audio discs contain DVD-Video as well as DVD-Audio. To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode. AV SYNC Setup Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. 1 Press the MENU button while the disc tray is open. 2 Press Cursor button to move to `Setup' and then press ENTER button. 1 Press the MENU button. 2 Press Cursor , buttons to move to `Audio' and then press ENTER button. · Setup menu appears. · 'Audio' menu appears. 3 Press Cursor button to move to `DVD TYPE' and then press ENTER button. 4 Press Cursor , button to move to `DVD VIDEO' and then press ENTER button. · Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode. 3 Press Cursor , buttons to move to `AV-SYNC' and then press ENTER button. 4 Press Cursor , buttons to select the Delay Time of AV-SYNC and then press the ENTER button. SETUP · AV-SYNC screen appears. · You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status. When Selecting DVD Play Mode: · DVD VIDEO : set to play the DVD video · Note contents contained in DVD audio disc. DVD AUDIO : set to play the default DVD audio. · DVD Play mode is set to DVD Audio as factory default setting. Press RETURN button to return to the previous level. Press RETURN button to return to the previous level. 45 Press MENU button to exit the setup screen. Press MENU button to exit the setup screen. 46 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Setting the Test Tone Press the Test Tone to check the speaker connections and to adjust the speaker levels. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to `Audio' and then press ENTER button. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to `Audio' and then press ENTER button. 3 Press Cursor button to move to `TEST TONE' and then press ENTER button. · The test tone will be sent to L C R SR SL SW in that order. If the ENTER button is pressed again at this time, the test tone will stop. 3 In the Speaker Setup, press the ENTER button again. 4 · Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. SETUP · For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL NONE. For L and R, the mode is set to SMALL. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. SMALL : Select this when using the speakers. NONE : Select this when no speakers are installed. When manually testing using the TEST TONE button Press TEST TONE button. · L: Front Speaker (L) C: Center Speaker R: Front Speaker (R) LS: Rear Speaker (L) SW: Subwoofer RS: Rear Speaker (R) Multi-Channel Pro Logic Mode Note · Depending on PRO LOGIC and STEREO, the speaker mode may vary. · Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. Use this function to check that each speaker is correctly connected and that there is no problem. Start 47 To end the test tone, press TEST TONE button. 48 Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 1 In Stop mode, press MENU button. 2 Press Cursor button to move to `Audio' and then press ENTER button. 3 Press Cursor button to move to `DELAY TIME' and then press ENTER button. 4 Press Cursor , , , buttons to move to the desired speaker and then press ENTER button. 5 Press Cursor , to set the Delay time. · You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. SETUP Setting up the Speaker Delay Time When 5. 1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. · Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc 0. 00 m 0. 34 m 0. 68 m 1. 02 m 1. 36 m 1. 70 m Ideal CENTER SPEAKER placement Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms 5 ms Note (Dolby Pro Logic II), the delay time may be different for each mode. · With · With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. · Setting REAR () SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Ds 0. 00 m 1. 02 m 2. 04 m 3. 06 m 4. 08 m 5. 10 m Ideal SPEAKER placement It is desirable to place all speakers within this circle. Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SPEAKER Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms 15 ms 49 50 Setting the Audio Quality You can adjust the balance and level for each speaker. Method 1 When adjusting the audio quality using the setup screen Method 2 When manually adjusting with the SOUND EDIT button Adjusting Rear Speaker Balance Adjusting Center Speaker Level 1 In Stop mode, press MENU button. 2 Press Cursor button to move to `Audio' and then press ENTER button. Adjusting Front Speaker Balance 1 TITLE Press SOUND EDIT button and then press Cursor , . CHAP PRGM RDS RT ST 2 TITLE Press SOUND EDIT button and then press Cursor , . CHAP PRGM RDS RT ST 3 TITLE Press SOUND EDIT button and then press Cursor , . CHAP PRGM RDS RT ST TUNED kHz MHz TUNED kHz MHz TUNED kHz MHz 3 Press Cursor button to move to `SOUND EDIT' and then press ENTER button. 4 Press Cursor , , , buttons to select the desired item and then press ENTER button. Adjusting Rear Speaker Level Adjusting Subwoofer Speaker Level SETUP 4 TITLE Press SOUND EDIT button and then press Cursor , . CHAP PRGM RDS ST 5 TITLE Press SOUND EDIT button and then press Cursor , . CHAP PRGM RDS RT ST TUNED kHz MHz TUNED kHz Press RETURN button to return to the previous level. [. . . ] Avoid CD-R media, as they may not be playable. · If possible, do not use CD-RW (Rewritable) media, as they may not be playable. · Only the CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc. CHAPTER NUMBER DVD CD-R MP3 Discs · Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played. [. . . ]