User manual SAMSUNG MAX-KDZ110

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] RPT SHF: Plays tracks in random order. (Each track can be played one time. ) RPT OFF: Cancels Repeat Playback. File Compatibility The unit will playback files created in MP3 format (Mpeg1. Layer3) with *. mp3 as their extension, and some WMA files with. WMA extension can't be playback. Playback will be impossible for the file of MP2 or 22KHz. 2 How many MP3 files can a CD-R or CD-RW disc record? The maximum capacity of one CD-R or CD-RW disc is 680MB. Normally, one MP3 file has a capacity of 4MB, therefore approximately 170 files can be recorded on a single disc. Regarding the playback of CD-R/RW In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status. ) The CD-RW is comparably less reflexive than CD which causes more time delay to read. 1, 2 A-B Repeat Playback You can repeatedly play back a designated section of a CD/MP3/WMA-CD. Press the REPEAT A-B button at the beginning of desired part. Press the REPEAT A-B button at the ending of desired part. To cancel REPEAT A-B function, press REPEAT A-B button again. 1 2 3 Point B cannot be set until 5 seconds of playback has elapsed from point A. 11 Function to skip through 10 tracks at a time ENG Press the +10 button briefly while playing back a CD and MP3/WMA-CD . The track 10 tracks after the current one will then be played back. Example: If you want to select track 43 during playback of track 5, press the +10 button four times, and then press the button three times . Programming the Order of CD Playback You can decide: (This function is not available during playback of an MP3/WMA-CD. ) The order of the track desired to listen The track not desired to listen You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. 5 10 20 30 40 41 42 43 1 2 If the CD function is selected, stop the player by pressing Press PROGRAM/SET. Result: The following indications are displayed: . (01 = Program no. , -- -- = Track no. Select USB function by pressing the USB button. The first track of the first directory plays automatically. To stop playing Press the Stop ( ) button to stop playing. Delay When selecting USB function, file reading (READ-IN) may take several minutes. When playing a USB device, there may be a delay then advancing to the next track, especially with HDD. The operation time of external USB storage devices will vary;even when they are of the same capacity. If the external USB storage device supports only USB VER1. 1 and the access speed is slow, the file may not property. 2 1 2 Do not connect a USB charging device to the USB connection port on the player, because it may cause damage to the product. 14 To use high speed search Before you begin!Connect the external USB storage device to your player. Select USB function by using the USB button. To repeat section ENG Before you begin!Connect the external USB storage device to your player. Select USB function by using the USB button. Press the REPEAT A-B button at the beginning of desired part. [. . . ] Clean them with a special-purpose cloth. Store your compact discs in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Always use compact discs marked . COMPACT DIGITAL AUDIO Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock. Do not remove any equipment panels. [. . . ]