User manual SAMSUNG MAX-S520

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-S520 MAX-S530 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Result: The first track selected is played. Press the Tuning Mode button so that the "MANUAL" indicator lights up on the front panel display. Press / on the main unit to tune in to the desired station manually. or Press Tuning or on the remote control to do the same. Automatic tuning 5 Press and hold / on the main unit for more than 1 second so that the "AUTO" indicator lights up on the front panel display. Press and briefly hold / on the main unit to begin automatic tuning. or Press and briefly hold Tuning or on the remote control to do the same. Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak. For details on the Preset function, see the "Selecting a Stored Station" on page 14. 5 2, 3, 4, 7 1 Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the FM stereo or mono mode by pressing Mono/ST. on the remote control. 8 6 6 6 5 1 1 2, 3, 4, 7 5 6 6 4 8 6 2, 3 4 4 5 6 4 3 13 Searching for and Storing the Radio Stations (continued) GB Selecting a Stored Station You can listen to a stored radio station as follows: 7 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a programme number between 1 and 15. c Press Memory to store the radio station. Result: PRGM is no longer displayed and the station is stored. 1 2 3 4 5 Switch the system on by pressing Standby/on. Select the TUNER function by pressing Tuner . Select the required frequency band by pressing Tuner (Band) on the remote control or TUNER (Band) again on the front panel. Press button on the front panel of the unit, or the Tuning / Mode button on the remote control until "PRESET" is displayed. Press on the front panel of the unit to select the desired / station. or Select the desired station by pressing the station number stored, using the Tuning or button on the remote control. Result: The desired station is now received. 8 To store any other radio frequencies required, repeat Steps 3 to 7. The PROGRAM function can be used to assign a new station to an existing programme number. 7 1 7 7 4, 5 4 4, 5 2, 3 In Tuner Mode In manual tuning mode, you can use / button to manual search a radio station. During Tuner auto searching, press button to stop auto searching. In Preset tuning mode, you can use / button to search a stored radio station. you can use Program /Set button on the remote control to instead Memory button in step 7. Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press Mono/ST. [. . . ] · The volume has been completely turned down. · The correct function (TUNER, CD, TAPE, AUX) has not been selected. · You have connected a set of earphones. · The loudspeaker wires have been disconnected. [. . . ]