User manual SAMSUNG MAX-S725

[. . . ] MAX-S720GBR 1~15 2/19/03 2:39 PM Page 1 THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-S720/S720S MAX-S725 Instruction Manual MAX-S720GBR 1~15 2/19/03 2:39 PM Page 2 Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Result: The selection is stored and is displayed. 13 MAX-S720GBR 1~15 2/19/03 2:40 PM Page 14 Checking or Changing Programmed Tracks GB You can check or change your selection of tracks at any time. Searching for and Storing the Radio Stations You can store up to: 15 FM stations 8 MW stations 7 LW stations 1 2 Press once if you have started listening to the selection. Press Program. Result: The following indications are displayed: (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing Standby/On. Select the TUNER function by pressing TUNER. Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave To search for a station. . . Manually Automatically Press Tuning Mode One or more times until MANUAL is displayed. One or more times until AUTO is displayed. 3 4 5 6 7 8 Press Program again. Result: The first track selected is displayed, together with the letter CH (Change). Press Program one or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press and or turn Multi Jog to select a different track. 4 Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. 5 Select the station to be stored by: Turning the Multi Jog knob to the right or to the left to increase or decrease the frequency respectively or Pressing Tuning or on the remote control To scroll through the frequencies faster when searching manually, hold down the Tuning Down or Up buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. 5 6 8 6 2, 3, 4, 7 6 1 6 Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the FM stereo or mono mode by pressing Mono/ST. 7 6 2, 3 1 4 5 2, 3, 4, 7 6 6 5 7 5 4 5 5 1 8 14 MAX-S720GBR 1~15 2/19/03 2:40 PM Page 15 Searching for and Storing the Radio Stations (continued) Selecting a Stored Station GB You can listen to a stored radio station as follows: 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a program number between 1 and 15. c Press Memory to store the radio station. Result: PRGM is no longer flashed and the station is stored. 1 2 3 4 5 Switch the system on by pressing Standby/On. Select the TUNER function by pressing TUNER on remote control. Select the required frequency band by pressing TUNER (Band) on the remote control or TUNER (Band) again on the front panel. [. . . ] · The MUTE button has been pressed. · The timer has been stopped by pressing Timer On/Off. Surround button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]