User manual SAMSUNG MAX-VS950

[. . . ] ULTIMATE POWER MINICOMPACT SYSTEM VCD/MP3-CD/CD-R/RW PLAYBACK MAX-VS940 MAX-VS950 MAX-VS990 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 2 Contents Thank you for buying this SAMSUNG mini-compact system. Please take time to read these instructions. [. . . ] Once if the compact disc player is stopped Result: PRGM is no longer displayed. If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the / buttons to select the required tracks in step 5, 9. 8 / 6 1 2, 3, 4, 7 6 6 4 8 / 8 5, 9 6 1, 10 1 6 3, 6 14 Video CD Player Playback In order to playback video VIDEO-CD(`S), make sure that your unit is connected to your TV set. This unit is designed for playback of video CD(`S), version 1. 1 and 2. 0. Only with version 2. 0, is it possible to call up the on screen menu function. This unit will not play back any other video VIDEO-CD(`S) other than 1. 1 and 2. 0 versions. Search Functions GB You can find a certain passage faster during playback. This function is possible in CD or VCD Ver 1. 1 or Ver 2. 0 menu off mode. 1 2 To. . . Scan forwards Scan backwards Press and hold down. . . 1 2 3 4 5 Turn on the ECO/STANDBY/ON switch and set the VCD mode. Press the OPEN/CLOSE ( ) button on the unit, to open the CD tray. Result: "OPEN" is displayed and CD tray slides open. Load a video-CD('S) with the label facing upwards in the tray. Press the OPEN/CLOSE ( To playback: In version 1. 1, press the button for direct access to the film, as there is no menu-on-screen. In version 2. 0, load a video CD, "Video CD2. 0", and "MENU ON" are displayed on the TV screen. Press the button and the menu is displayed on the TV screen. Select a number from the menu using Digits button on the remote control or MULTI JOG knob and press the VCD/CD( ) button. ) button again to close the CD tray. Release the SKIP/SEARCH buttons when the desired passage has been found. In the video CD version 1. 1, where the disc's contents are over 15 minutes long, you can scan up or down by intervals of five minutes. 3 To. . . Scan forwards by 5 minute intervals Scan backwards by 5 minute intervals Press. . . Result: The picture is still, and the disc's contents are forwarded or reversed by 5 minute intervals. Playback then resumes from this new position. In the SKIP/SEARCH or SCAN mode, the sound can only be partially heard and the picture scenes will change sporadically, until the required passage has been found. To return to the previous menu, press the RETURN button on the Remote control or ENTER/DISPLAY button on the front panel . When playing a video-CD(`S) version 2. 0, reading time on the display may take longer, depending on the disc's contents. 6 7 8 Press button on the remote control to receive a still picture. Result: Pause is displayed, a still picture appears and the sound is muted. To return to normal playback, press VCD/CD( Press the Stop ( ) button to stop playback. [. . . ] · The timer has been stopped by pressing TIMER ON/OFF. · Press the P. SURROUND/P. SOUND button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. · The laser sensor is dirty or dusty. [. . . ]