User manual SAMSUNG MAX-VT35

[. . . ] THREE-CD CHANGER VIDEO-CD MINI-COMPACT SYSTEM VCD/MP3-CD/CD-R/RW PLAYBACK MAX-VT35 Instruction Manual Safety Warnings GB Contents Thank you for buying this SAMSUNG mini-compact system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. [. . . ] ) button again to close the CD tray. Release the SKIP/SEARCH buttons when the desired passage has been found. 3 4 5 6 7 Press PROGRAM again. Result: The first track selected is displayed, together with the letter C (Change). Press PROGRAM one or more times until the track to be changed is displayed. Press and or turn MULTI JOG to select a different track. In the video CD version 1. 1, where the disc's contents are over 15 minutes long, you can scan up or down by intervals of five minutes. 3 To. . . Scan forwards by 5 minute intervals Scan backwards by 5 minute intervals Press. . . (01 = Program no. , I = Disc no. , ­ ­ ­ ­ = Track no. on the disc) 4 5 6 7 8 Select the required track by turning the MULTI JOG knob: To the left to move back through the tracks To the right to move forward through the tracks Press PROGRAM to confirm your selection. Result: The selection is stored and To select other tracks, repeat Steps 4 to 6. Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks ) to listen to the track selection in the order programmed. One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left is displayed. Press PROGRAM to confirm your change. Press VCD/CD ( ) to start listening to the selection. Result: The first track selected is played. Result: The picture is still, and the disc's contents are forwarded or reversed by 5 minute intervals. Playback then resumes from this new position. To return to the previous menu, press the RETURN button on the Remote control or ENTER button on the front panel . When playing a video-CD(`S) version 2. 0, reading time on the display may take longer, depending on the disc's contents. In the SKIP/SEARCH or SCAN mode, the sound can only be partially heard and the picture scenes will change sporadically, until the required passage has been found. The search speed FF changes as follows X1, X2, X3, X4 speed. TIME SEARCH SOUND MODE DISC VIEV RETURN 6 7 8 7 Press button on the remote control to receive a still picture. Result: Pause is displayed, a still picture appears and the sound is muted. To return to normal playback, press VCD/CD( Press the Stop ( ) button to stop playback. ) button. VCD/ CD /TAPE 9 To cancel the selection, press . Once if the compact disc player is stopped, twice the selection is canceled. If you open the compartment, the selection is cancelled. You can also use the / buttons to select the required tracks in step 4, 8. Time Search Function (This function is available only during the playback of a CD/VCD) Please use this function for reproducing a desired track in a certain time of playback. Please make sure that the VIDEO-CD(`S) to be played is not flawed optically, as this may cause a distorted sound or the unit to malfunction. 1 5 5 5 2, 3, 4, 6 2, 4 TIME SEARCH SOUND MODE DISC VIEV RETURN 1 2 3 Press the TIME SEARCH button. Set a desired time by pressing the DIGIT buttons. [. . . ] · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the STOP button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]