User manual SAMSUNG MAX-WB650 NO RDS

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-WB630 MAX-WB650 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the / buttons to select the required tracks in step 5, 9. ] You can also use Program/Set button on the remote control to instead Program button in step 3, 6. Programming the Order of Playback You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 4 8 5, 9 1 2 3 If the CD function is selected, stop the player by pressing Load the selected CDs. Result: The following indications are displayed: . 1, 10 3, 6 (01 = Program no. , DI = Disc no. , ­ ­ = Track no. on the disc) 4 5 6 If necessary, select the disc containing the required track by pressing the corresponding Disc (1, 2, 3) button. Select the required track by turning the Multi Jog knob: To the left to move back through the tracks To the right to move forward through the tracks Press Program to confirm your selection. Result: The selection is stored and is displayed. 12 Checking or Changing Programmed Tracks You can check or change your selection of tracks at any time. Searching for and Storing the Radio Stations GB You can store up to: 15 FM stations 15 AM stations (or 8 MW and 7 LW stations) or 15 AM stations (5 MW , 5 SW1, and 5 SW2 Stations) 1 2 Press once if you have started listening to the selection. Press Program. Result: The following indications are displayed: (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing Standby/On. Select the TUNER function by pressing TUNER. Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave SW1(Option) Short Wave SW2(Option) Short Wave LW(Option) Long Wave To search for a station. . . Manually Automatically Press Tuning Mode on the front panel or on the remote control One or more times until MANUAL is displayed. One or more times until AUTO is displayed. 3 4 5 6 7 8 Press Program again. Result: The first track selected is displayed, together with the letter CH (Change). Press Program one or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press and or turn Multi Jog to select a different track. 4 Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. 5 Select the station to be stored by: Turning the Multi Jog knob to the right or to the left to increase or decrease the frequency respectively or Pressing Tuning or on the remote control To scroll through the frequencies faster when searching manually, hold down the Tuning Mode Down or Up buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. [. . . ] · The Mute button has been pressed. · The timer has been stopped by pressing Timer On/Off. · Press the P. Surround button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]