User manual SAMSUNG MAX-WL85

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-L82 MAX-WL85 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Result: The following indications are displayed: (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing On/Standby. Select the TUNER function by pressing TUNER. Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave To search for a station. . . Manually Automatically Press Preset/Manual on the front panel or Tuning Mode on the remote control One or more times until MANUAL is displayed. One or more times until AUTO is displayed. 3 4 5 6 7 8 Press Program again. Result: The first track selected is displayed, together with the letter CH (Change). Press Program one or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press and or turn Moving Jog to select a different track. 4 Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. 5 Select the station to be stored by: Turning the Moving Jog knob to the right or to the left to increase or decrease the frequency respectively or Pressing Tuning or on the remote control To scroll through the frequencies faster when searching manually, hold down the Preset/Manual Down or Up buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. Disc 1 Disc 1 Disc 2 Disc 2 Disc 3 Disc 3 Disc Change Open/Close 5 Power Surround On/ Standby Timer/ Clock Volume PTY 6 8 Band RDS R Display AUX Demo Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the stereo or mono mode by pressing Mono/ST. Power Surround On/ Standby TUNER CD CD TAPE Sound Mode 7 Mute 2, 3, 4, 7 Mono/ST Program Preset Memory CD Repeat REC/Pause Shuffle CD Synchro Enter Reverse Mode Timer/ Clock Volume Volume 6 Deck 1/2 Counter Reset PTY Phones Dubbing 6 Do wn 6 High 1 R Push Eject AUX RDS Display 1 Normal Preset/Manual Preset/Manual Up 2, 3 Demo Band Push Eject TUNER CD TAPE Sound Mode Sound Mode Disc Skip Program /Set AUX Enter Mute Deck 1/2 Mono/ST. 2, 3, 4, 7 CD Repeat TUNER Phones Mono/ST Program Reverse Mode Band 7 Preset Memory 5 Do wn CD Repeat REC/Pause Shuffle CD Synchro 5 Deck 1/2 Counter Reset Dubbing Tape 1 CD 8 4 Normal Preset/Manual Preset/Manual High Up Push Eject Push Eject VOL. VOL. 4 CD 6 CD Tuning Mode CD 6 CD CD Tuning Mode 5 VOL. VOL. 5 14 Searching for and Storing the Radio Stations (continued) Selecting a Stored Station GB You can listen to a stored radio station as follows: 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. b Press Preset/Manual Down and Up to assign a program number between 1 and 15. c Press Preset/Memory to store the radio station. Result: PRGM is no longer flashed and the station is stored. 1 2 3 4 5 Switch the system on by pressing On/Standby. Select the TUNER function by pressing TUNER (Band) on remote control. [. . . ] · The Mute button has been pressed. · The timer has been stopped by pressing Timer On/Off. · Press the S. BASS button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]