User manual SAMSUNG MAX-X55

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM MP3-CD/WMA-CD/CD-R/RW PLAYBACK MAX-X55/X56/X57 MAX-X65/X66 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] All tracks on the compact disc selected. All discs loaded in the carrousel Function to skip through 10 tracks at a time Press the +10 button briefly while playing back a CD and MP3/WMA-CD . The track 10 tracks after the current one will then be played back. Example: If you want to select track 43 during playback of track 5, press the +10 button four times, and then press the button three times . 1 To repeat. . . Press CD REPEAT on the Remote control once or more times until. . . REPEAT 1 is displayed REPEAT 1 CD is displayed REPEAT ALL CD is displayed The current track indefinitely The selected disc All discs loaded 5 10 20 30 40 41 42 43 2 When you wish to stop the Repeat function, press CD REPEAT until ALL CD or 1 CD is displayed, or press . 1, 2 Last Memory Function (This function is only available during playback of MP3/WMA-CD. ) 2 When MP3/WMA-CD playback is selected again after your CD player has been stopped or turned off, this function allows playback from the start of the track that you last listened to. Press the PROGRAM/SET button while your MP3/WMA-CD is being played . The LAST ON and LAST OFF may be repeatedly selected. 14 Programming the Order of CD Playback GB You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 4 1 2 3 If the CD function is selected, stop the player by pressing Load the selected CDs. Result: The following indications are displayed: . 5, 9 1, 10 5, 9 5, 9 3, 6 8 (01 = Program no. , PR1 = Disc no. , ­ ­ = Track no. on the disc) 4 5 6 7 8 9 If necessary, select the disc containing the required track by pressing the corresponding DISC (1, 2, 3) button. Select the required track by turning the MULTI JOG knob: To the left to move back through the tracks To the right to move forward through the tracks Press ENTER/PRGM. Result: The selection is stored and To select other tracks, repeat Steps 4 to 6. Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks ) to listen to the track selection in the order is displayed. Turn the MULTI JOG knob. . . One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left 10 To cancel the selection, press . Once if the compact disc player is stopped again, PRGM is no longer displayed. Result: press If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. / buttons to select the required You can also use the tracks in step 5, 9. 15 Checking or Changing Programmed CD Tracks GB You can check or change your selection of tracks at any time. 1 2 Press once if you have started listening to the selection. Press ENTER/PRGM. . Result: The following indications are displayed: (CH = Check, 01=Program No, CH1 = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press ENTER/PRGM. . 3 4 5 6 7 Press ENTER/PRGM. once or more times until the track to be changed is displayed. [. . . ] · The loudspeaker wires have been disconnected. · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the STOP BUTTON for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. [. . . ]