User manual SAMSUNG MAX-ZB450

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM MP3-CD/CD-R/RW PLAYBACK MAX-ZB450 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave Tune in to the desired station. Manual tuning 4 Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. Press the Tune/CD Mode button so that the "MANUAL" indicator lights up on the front panel display. Press / on the main unit to tune in to the desired station manually. or Press Tuning or on the remote control to do the same. Automatic tuning 5 Press and hold / on the main unit for more than 1 second so that the "AUTO" indicator lights up on the front panel display. Press and briefly hold / on the main unit to begin automatic tuning. or Press and briefly hold Tuning or on the remote control to do the same. Use the manual tuning method if the automatic tuning search does not stop at the desired station because the signal is weak. For details on the Preset function, see the "Selecting a Stored Station" on page 16. 2, 3, 4, 7 8 1 6 6 5 Adjust the volume by: Turning the Volume knob on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the FM stereo or mono mode by pressing Mono/ST. on the remote control. 6 5 1 8 1 2, 3 4 2, 3, 4, 7 6 6 4 4 6 4 15 Searching for and Storing the Radio Stations (continued) GB Selecting a Stored Station You can listen to a stored radio station as follows: 7 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. b Press Tuning Down and Up to assign a programme number between 1 and 15. c Press Program to store the radio station. Result: PRGM is no longer displayed and the station is stored. 1 2 3 4 5 Switch the system on by pressing Standby/on. Select the TUNER function by pressing Tuner . Select the required frequency band by pressing Tuner (Band) on the remote control or TUNER (Band) again on the front panel. Press button on the front panel of the unit, or the Tune/CD / Mode button on the remote control until "PRESET" is displayed. press on the front panel of the unit to select the desired / station. or Select the desired station by pressing the station number stored, using the Tuning or button on the remote control. Result: The desired station is now received. 8 To store any other radio frequencies required, repeat Steps 3 to 7. The PROGRAM function can be used to assign a new station to an existing programme number. 7 7 1 7 5 4 5 2, 3 In Tuner Mode In manual tuning mode, you can use search a radio station. [. . . ] · The laser sensor is dirty or dusty. · The system has not been installed on a flat, horizontal surface. · Condensation has formed in the player; leave the system in a warm, airy room for at least one hour. · The TAPE function has not been selected. [. . . ]