User manual SAMSUNG MAX-ZB630

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM CD-R/RW PLAYBACK MAX-ZB630 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Result: The following indications are displayed: . 15 20 30 40 41 42 43 (01 = Program no. , DI = Disc no. , ­ ­ = Track no. on the disc) +10 +10 +10 CD CD CD 4 5 If necessary, select the disc containing the required track by pressing the corresponding Disc (1, 2, 3) button. Select the required track by turning the Multi Jog knob: To the left to move back through the tracks To the right to move forward through the tracks Press Program to confirm your selection. Result: The selection is stored and is displayed. Last Memory Function *This function is only available during playback of an MP3-CD. 6 7 8 9 When MP3-CD playback is selected again after your CD player has been stopped or turned off, this function allows playback from the start of the track that you last listened to. Press the Program button on the main set or Program/Set button on the remote control while your MP3-CD is being played back. The LAST ON and OFF may be repeatedly selected. To select other tracks, repeat Steps 4 to 6. Press CD ( ) to listen to the track selection in the order programmed. Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks Turn the Multi Jog knob. . . One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left Repeating One or All Tracks on the Compact Discs You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. All discs loaded in the carrousel 10 To cancel the selection, press . Once if the compact disc player is stopped Result: PRGM is no longer displayed. 1 To repeat. . . The current track indefinitely The selected disc All discs loaded Press CD Repeat on the Front Panel one or more times until. . . REPEAT 1 is displayed REPEAT 1 CD is displayed REPEAT ALL CD is displayed If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the / buttons to select the required tracks in step 5, 9. You can also use Program/Set button on the remote control to instead Program button in step 3, 6. 2 When you wish to stop the Repeat function, press CD Repeat until ALL CD or 1 CD is displayed, or press . 4 Programming the Order of Playback You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 8 5, 9 1, 10 3, 6 13 Checking or Changing Programmed Tracks You can check or change your selection of tracks at any time. Searching for and Storing the Radio Stations GB You can store up to: 15 FM stations 15 AM stations (or 8 MW and 7 LW stations) or 15 AM stations (5 MW , 5 SW1, and 5 SW2 Stations) 1 2 Press once if you have started listening to the selection. Press Program. Result: The following indications are displayed: (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing Standby/On. Select the TUNER function by pressing TUNER. Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. [. . . ] · The Mute button has been pressed. · The timer has been stopped by pressing Timer On/Off. · Press the P. Surround button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]