User manual SAMSUNG MAX-ZL45 INTRODUCTION

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM MP3-CD/CD-R/RW PLAYBACK MAX-ZL45 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks ) to listen to the track selection in the order programmed. One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left 9 Repeating One or All Tracks on the Compact Discs You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. All discs loaded in the carrousel 10 To cancel the selection, press . Once if the compact disc player is stopped Result: PRGM is no longer displayed. 1 To repeat. . . The current track indefinitely The selected disc All discs loaded Press Repeat on the Front Panel one or more times until. . . REPEAT 1 is displayed REPEAT 1 CD is displayed REPEAT ALL CD is displayed If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the / buttons to select the required tracks in step 5, 9. 8 5, 9 1, 10 5, 9 3, 6 5, 9 2 When you wish to stop the Repeat function, press Repeat until ALL CD or 1 CD is displayed, or press . 4 14 Checking or Changing Programmed Tracks You can check or change your selection of tracks at any time. Searching for and Storing the Radio Stations GB You can store up to: 15 FM stations 8 MW stations 7 LW stations 1 2 Press once if you have started listening to the selection. Press Program. Result: The following indications are displayed: (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing On/Standby. Select the TUNER function by pressing TUNER . Select the required frequency band by pressing TUNER (Band) again on the front panel or TUNER (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW Long Wave To search for a station. . . Manually Preset Press Tuning Title One or more times until MANUAL is displayed. One or more times until PRESET is displayed. 3 4 5 6 7 8 Press Program again. Result: The first track selected is displayed, together with the letter CH(Change). Press Program one or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. Press / or turn Multi Jog to select a different track. 4 5 Press Program to confirm your change. Press CD ( ) to start listening to the selection. Result: The first track selected is played. Select the station to be stored by: Turning the Multi Jog knob to the right or to the left to increase or decrease the frequency respectively or Pressing Tuning or on the remote control To scroll through the frequencies faster when searching manually, hold down the Tuning Down or Up buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. [. . . ] · Press the S. Bass button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. · The laser sensor is dirty or dusty. · The system has not been installed on a flat, horizontal surface. [. . . ]