User manual SAMSUNG MAX-ZS730

[. . . ] THREE-CD CHANGER MINI-COMPACT SYSTEM MP3-CD/CD-R/RW PLAYBACK MAX-ZS730 MAX-ZS750 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Listen to the current track again Listen to the previous track Listen to the next track Skip forwards or backwards one or more tracks Turn the Multi Jog knob. . . One notch to the left Two notches to the left One notch to the right The appropriate number of notches to the right or to the left 1 To repeat. . . The current track indefinitely The selected disc All discs loaded Press CD Repeat on the Front Panel one or more times until. . . REPEAT 1 is displayed REPEAT 1 CD is displayed REPEAT ALL CD is displayed 2 When you wish to stop the Repeat function, press CD Repeat until ALL CD or 1 CD is displayed, or press . 10 To cancel the selection, press . Once if the compact disc player is stopped Result: PRGM is no longer displayed. If you open the compartment, the selection is cancelled. If you select the number of a disc which is not loaded or a track which does not exist on the CD, the selection skips to the next programmed track. You can also use the tracks in step 5, 9. / buttons to select the required 4 Programming the Order of CD Playback You can decide: The order in which you listen to the tracks on the discs loaded Which tracks you do not wish to listen to You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. This feature can be combined with the Repeat function. 8 3, 6 1, 10 5, 9 1 2 3 If the CD function is selected, stop the player by pressing Load the selected CDs. Result: The following indications are displayed: . (01 = Program no. , DI = Disc no. , ­ ­ = Track no. on the disc) 4 5 6 If necessary, select the disc containing the required track by pressing the corresponding Disc (1, 2, 3) button. Select the required track by turning the Multi Jog knob: To the left to move back through the tracks To the right to move forward through the tracks Press Program to confirm your selection. Result: The selection is stored and is displayed. 15 Checking or Changing Programmed CD Tracks GB GB You can check or change your selection of tracks at any time. Searching for and Storing the Radio Stations You can store up to: 15 FM stations 15 AM stations 15 FM stations 8 MW stations 7 LW stations (option) 1 2 Press once if you have started listening to the selection. Press Program. Result: The following indications are displayed: (option) (CH = Check, 01=Program No, DI = Disc No, ­ ­ = Track No on the disc) If you have already programmed 24 tracks, CH is displayed instead of PR when you press Program. 1 2 3 Switch the system on by pressing Standby/On. Select the TUNER function by pressing TUNER. Select the required frequency band by pressing TUNER (Band) again on the front panel or Tuner (Band) on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW(OPTION) Long Wave 3 4 5 6 7 8 Press Program again. Result: The first track selected is displayed, together with the letter CH (Change). Press Program one or more times until the track to be changed is displayed. If necessary, press the corresponding Disc (1, 2, 3) button to change discs. [. . . ] · The timer has been stopped by pressing Timer On/Off. Surround button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. · The laser sensor is dirty or dusty. [. . . ]