User manual SAMSUNG MIM-B18

[. . . ] Data Management Server2 MIM-D00A BACnet Gateway MIM-B17 LonWorks Gateway MIM-B18 Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. E DB98-32140A(3) Safety Precautions · Before using the DMS2, read carefully these instructions. · After reading the instructions, keep this user's manual in a handy and safe place. If a user is changed, you must hand over the manuals. · Never attempt to install the air conditioning system or to move the DMS2 by yourself. WARNING o not attempt to install or repair this DMS2 by yourself. [. . . ] The number of outdoor units connected to DMS2 will be displayed. To check indoor unit information again, press [ ] button. You can go back to main menu by pressing [Menu] or [Set] button. E-136 Checking DMS2 Version Checking DMS2 Version 192. 168. 0. 100 06:12:13(AM) 1. Check main menus by pressing [Menu], [ ], [ ] or [Set] button. MAIN MENU 3. DMS Version 2. DMS2 Version by pressing [ ] and [ ] buttons. DMS version 2. 0 3. Press [Set] button. Current version of DMS2(DMS2 Version) will be displayed. You can go back to main menu by pressing [Menu] or [Set] button. E-137 Checking DMS2 version (Continued) DMS2 Time Setting ­ Checking and Setting Date 192. 168. 0. 100 06:12:13(AM) 1. Check main menus by pressing [Menu], [ ], [ ] or [Set] button. MAIN MENU 4. DMS time 2. DMS2 Time by pressing [ ] and [ ] buttons. Current set date of DMS2 will be displayed. CURRENT DATE 1983:04:16 3. When 'CURRENT DATE' appears, set current data by pressing [Set] button. Number to edit blinks. You can change value by pressing [ ] and [ ] buttons. To move to the next number, press [Set] button. Press and hold [ ], [ ] buttons to change the number continuously. Set year, month and day in order, and then press [Set] button to save. To cancel the setting, press [Menu] button. E-138 DMS2 Time Setting ­ Checking and Setting Time 192. 168. 0. 100 06:12:13(AM) 1. Check main menus by pressing [Menu], [ ], [ ] or [Set] button. MAIN MENU 4. DMS time 2. DMS2 Time by pressing [ ] and [ ] buttons. Current set time of DMS2 will be displayed. CURRENT TIME 16:46:37(PM) 3. Select 'CURRENT TIME' by pressing [ ] button. Current set time of DMS2 will be displayed. Number to edit blinks. You can change value by pressing [ ] and [ ] buttons. To move to the next number, press [Set] button. [. . . ] Redistributions are accompanied by a copy of the Source Code or by an irrevocable offer to provide a copy of the Source Code for up to three years at the cost of materials and delivery. Such redistributions must allow further use, modification, and redistribution of the Source Code under substantially the same terms as this license. For the purposes of redistribution "Source Code " means all files included in the original distribution, including all modifications or additions, on a medium and in a form allowing fully working executable programs to be produced. Redistributions of Source Code must retain the copyright notices as they appear in each Source Code file and the COPYRIGHT file, these license terms, and the disclaimer/limitation of liability set forth as paragraph 6 below. [. . . ]