User manual SAMSUNG MIM-D00A

[. . . ] Data Management Server2 MIM-D00A BACnet Gateway MIM-B17 LonWorks Gateway MIM-B18 Air Conditioner user manual imagine the possibilities Thank you for purchasing this Samsung product. E DB98-33388A(1) Safety Precautions · Before using the DMS2, read carefully these instructions. · After reading the instructions, keep this user's manual in a handy and safe place. If a user is changed, you must hand over the manuals. · Never attempt to install the air conditioning system or to move the DMS2 by yourself. WARNING Do not attempt to install or repair this DMS2 by yourself. [. . . ] Click [Save] after setting is completed. Please wait. " message appears and saving is completed. Then, tracking page with disabled items will be displayed again. If you click [Cancel], input fields are disabled and [Cancel] will change to [Edit]. 4 E-142 DMS DI·DO Port Setting 1 2 3 1 2 3 Select [System Settings] and then click [Tracking]. Click [Setting] which is next to DMS DI·DO of device list. Click [Edit] which is on the bottom of DMS DI·DO setting page. [Edit] will change to [Cancel]. E-143 System Settings (Continued) 4 5 4 Edit each item when DMS DI·DO selection and input fields are enabled. Device type : DI or DO Short name : Input short name of the device. Full name : Input full name of the device. Minimum value / Maximum value : MIN value is fixed as OFF and MAX value is fixed as ON. After the saving is complete, DMS DI·DO setting page with all deactivated items will appear. If you press [Cancel], webpage will refresh and it goes back to the state before the modification. 5 E-144 PIM Setting 1 2 3 1 2 Click [System Settings] [Tracking] when DMS2 web page menu screen appears. Click [Setting] which is next to PIM of device list. Enter administrator's password and then click [OK]. Click [Edit] which is on the bottom of PIM setting page. [Edit] will change to [Cancel]. 3 E-145 System Settings (Continued) 4 5 6 4 Select a field and edit each item when input fields are enabled. Note Each field range Watt-hour meter: 0~99999. 9(kWh) Pulse width: 20~400(ms) Pulse: 1~10000(Wh/Pulse) 5 6 Click the check boxes to select the channel applying for the setting. If you press [Cancel], webpage will refresh and it goes back to the state before the modification. E-146 Check Before using Panel Using LCD and LCD Button LCD is mounted on DMS2 for installation and convenience of the user. You can search menu and change setting using [] and [] buttons. If you press and hold [] or [] button in some menu such as IP setting, the value changes faster. To go to upper menu or cancel, select [MENU] button. To go to sub menu, select or save, press [SET] button. Operates some menus with care because they are related to the proper operation of DMS2 system. If you do not use DMS2 buttons for long periods of time, set button lock to avoid malfunction. Manufacturer is not responsible for the damage caused by wrong operation. Checking Main Menu 192. 168. 0. 100 06:12:13(AM) 1. [. . . ] Redistributions are accompanied by a copy of the Source Code or by an irrevocable offer to provide a copy of the Source Code for up to three years at the cost of materials and delivery. Such redistributions must allow further use, modification, and redistribution of the Source Code under substantially the same terms as this license. For the purposes of redistribution "Source Code " means all files included in the original distribution, including all modifications or additions, on a medium and in a form allowing fully working executable programs to be produced. Redistributions of Source Code must retain the copyright notices as they appear in each Source Code file and the COPYRIGHT file, these license terms, and the disclaimer/limitation of liability set forth as paragraph 6 below. [. . . ]