User manual SAMSUNG ML-1710

[. . . ] SAMSUNG LASER PRINTER User's Guide This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. © 2003 Samsung Electronics Co. , Ltd. [. . . ] Position the items exactly as you wish them to appear when printed as an overlay. If needed, save the file for later use. WORLD BEST 2 To change the print settings from your software application, access the printer properties. See page 4. 2. 3 Click the Extras tab, and click Edit button in the Overlay section. 4. 22 PRINTING TASKS 4 In the Overlays window, click Create Overlay. 5 In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:\Formover). 4 6 Click Save. You will see the name in the Overlay List. 7 Click OK or Yes until you complete creating. The file is not printed out. Instead it will be stored on your computer HDD disk. Note: The overlay document size must be the same as documents you will print with the overlay. Do not create an overlay with a watermark. PRINTING TASKS 4. 23 Using a Page Overlay After an overlay has been created, it is ready to be printed with your document. To print an overlay with a document: 1 Create or open the document you want to print. 2 To change the print settings from your software application, access the printer properties. See page 4. 2. 3 Click the Extras tab. 4 Select the desired overlay from the Overlay drop-down list box. 5 If the desired overlay file does not appear in the Overlay list, click Edit button and Load Overlay, and select the overlay file. If you have stored the overlay file you want to use into an external source, you can also load the file when you access the Load Overlay window. The file is now shown in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. 4. 24 PRINTING TASKS 6 If necessary, click Confirm page Overlay When Printing. If this box is checked, a message window will appear each time you submit a document for printing, asking you to confirm your wish to print an overlay on your document. Answering Yes to the window means that the selected overlay will be printed with your document. Answering No to the window cancels overlay printing. If this box is empty and an overlay has been selected, the overlay will be automatically printed with your document. 7 Click OK or Yes until the printing starts. The selected overlay will be downloaded with your print job and printed on your document. Note: The resolution of the overlay document must be the same as that of the document you will print with the overlay. 4 Deleting a Page Overlay You can delete page overlays that are no longer used. 1 In the printer properties window, click the Extras tab. 3 Select the overlay you want to delete from the Overlay List box. 4 Click Delete Overlay. 5 Click OK until you exit the Print window. PRINTING TASKS 4. 25 Using the Status Monitor If you installed the Status Monitor software, you can check the current status of the printer whenever you want. If an error occurs in your printer, the Status Monitor window appears, showing the error. Opening the Status Monitor 1 Double click the Status monitor icon on the Windows task bar. Double click this icon. Or, select Programs from Start, Samsung ML-1710 Series , and Samsung Printer Status Monitor. 2 The Samsung ML-1710 Series Status monitor window appears. You can change the Status Monitor program setting. You can check the version of the Status Monitor. 4. 26 PRINTING TASKS Changing the Status Monitor Program Setting From the Status Monitor window if you click the configuration icon , you can see the following window. · Always On Top always shows the Status monitor window on the top of the window regardless of other open programs. [. . . ] · The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0. 1 second). APPENDIX 7. 15 Paper Specifications Category Acid Content Caliper Curl in Ream Cut Edge Conditions Specifications 5. 5 ~ 8. 0 pH 0. 094 ~ 0. 18 mm (3. 0 ~ 7. 0 mils) Flat within 5 mm (0. 02 in. ) Cut with sharp blades with no visible fray. Must not scorch, melt, offset, or release hazardous emissions when heated to 200 °C (392 °F) for 0. 1 second. Long Grain 4 % ~ 6 % by weight 100 ~ 250 Sheffield Fusing Compatibility Grain Moisture Content Smoothness Paper Output Capacity Output Tray Face-down output tray Face-up output slot Capacity 50 sheets of 75 g/m2 bond (20 lb) paper 1 sheet of 75 g/m2 bond (20 lb) paper 7. 16 APPENDIX Printer and Paper Storage Environment Paper storage environmental conditions directly affect the feed operation. [. . . ]