User manual SAMSUNG ML-2150

[. . . ] SAMSUNG LASER PRINTER User's Guide ML-2150 Series This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to use of this manual. © 2003 Samsung Electronics Co. , Ltd. [. . . ] If this box is empty and an overlay has been selected, the overlay will be automatically printed with your document. 7 Click OK or Yes until the printing starts. The selected overlay will be downloaded with your print job and printed on your document. Note: The resolution of the overlay document must be the same as that of the document you will print with the overlay. Deleting a Page Overlay You can delete page overlays that are no longer used. 1 In the printer properties window, click the Extras tab. 3 Select the overlay you want to delete from the Overlay List box. 4 Click Delete Overlay. 5 Click OK until you exit the Print window. 5. 24 PRINTING TASKS Setting Graphic Properties Use the following graphic options to adjust the print quality for your specific printing needs. See page 5. 2 for more information about accessing printer properties. Click the Graphics tab to display the properties shown below. 1 2 3 5 4 Property Description You can select the printing resolution by choosing from 1200 dpi (Best), 600 dpi (Normal) or 300 dpi (Draft). The higher the setting, the sharper the clarity of printed characters and graphics. Higher settings may increase time it takes to print a document. Selecting this option will extend the life of your toner cartridge and reduce your cost per page without a significant reduction in the print quality. For detailed information about this mode, see page 5. 9. 1 Resolution 2 Toner Save PRINTING TASKS 5. 25 Property Description Some printed characters or images appear to have jagged or uneven edges. Set this Image Mode option to improve the print quality of your text and image, and make the characters and images appear smoother. The Image Mode option is only available when you select 600 dpi (Normal) in the Resolution option. · Normal: This setting prints images in the normal mode. · Text Enhance: This setting refines the print quality of characters by smoothing out jagged edges that can occur on the angles and curves of each character. · Image Enhance: This setting refines the print quality of photo images. You can set advanced settings by clicking the Advanced Options button. 3 Image Mode 4 Advanced Options Darkness Use this option to lighten or darken the image appearance in your print. · Normal: This setting is for normal documents. · Light: This setting is for bolder line widths or darker gray-scale images. · Dark: This setting is for finer line width, higher definition in graphics, and lighter gray-scale images. When the Darken Text option is checked, all text in your document is allowed to print darker than a normal document. 5. 26 PRINTING TASKS Property Description True-Type Options This option determines what the driver tells the printer about how to image the text in your document. Select the appropriate setting according to the status of your document. · Download as Bit Image: When this option is selected, the driver will download the font data as bitmap images. Documents with complicated fonts, such as Korean or Chinese, or various types of fonts will print faster in this setting. [. . . ] · Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0. 25 in. ) curl, and should not contain air. · Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged. · Temperature: You should use envelopes that are compatible with the heat and pressure of the printer. · Size: You should only use envelopes within the following size ranges. [. . . ]