User manual SAMSUNG ML-2255G

[. . . ] This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to the use of this manual. © 2004 Samsung Electronics Co. , Ltd. [. . . ] Select the required print order from the drop-down list. · Normal:Your printer prints in normal order. · Reverse All Pages:Your printer prints all pages in reversed order. This setting is helpful when you are using the rear output tray. · Print Odd Pages:Your printer prints only the odd pages of the document. · Print Even Pages:Your printer prints only the even pages of the document. When this option is checked, the printer keeps the image for a printed page until the printer signals that the page has successfully exited the printer. When a paper jam occurs, the printer reprints the last page after you clear the jam. PRINTING TASKS 4. 25 Print Order Reprint When Jammed Using the Status Monitor If an error occurs while printing, the Status Monitor window appears, showing the error. NOTEs: · The Status Monitor program can only be used if you connect the printer to your computer with the USB cable, or on the network. · You can use the Status Monitor in Windows 98/Me/NT 4. 0/2000/ XP. Installing Status Monitor 1 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run and an maintenance window appears. If the maintenance window does not appear, click Start and then Run. Type X:\Setup. exe, replacing "X" with the letter of your drive and click OK. NOTE: If your machine is not connected to the computer, the following window will appear. · After connecting the machine, click Next. · If you want to skip the connection status, click Next, and No to the following screen. 2 Click Custom. If you have been installed the printer driver before, click Repair. 3 Click Status Monitor and then click Next. 4 When the installation is completed, click Finish. 4. 26 PRINTING TASKS Reinstalling Status Monitor 1 From the Start menu, select Programs. 2 Select Samsung ML-2250 Series, and then Maintenance. 3 Click Repair. 4 Click Status Monitor and then click Next. 5 When reinstallation is done, click Finish. Removing Status Monitor 1 From the Start menu, select Programs. 2 Select Samsung ML-2250 Series, and then Maintenance. 4 3 Check Remove. 4 Click Status Monitor and then click Next. 5 When removing is completed, click Finish. Opening the Troubleshooting Guide Double click the Status monitor icon on the Windows task bar. Double click this icon. Or, from Programs from Start, Samsung ML-2250 Series, and Troubleshooting guide. PRINTING TASKS 4. 27 Changing the Status Monitor Program Setting The following window opens when you click the Status monitor icon on the Windows task bar and select Option. · Display when job is finished for network printer shows the Status monitor balloon when your job is complete. [. . . ] · Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0. 25 in. ) curl, and should not contain air. · Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged. · Temperature: You should use envelopes that are compatible with the heat and pressure of the printer. · Size: You should only use envelopes within the following size ranges. [. . . ]