User manual SAMSUNG ML-2851NDR

[. . . ] This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to the use of this manual. © 2007 Samsung Electronics Co. , Ltd. [. . . ] Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. · Check if the printer is started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. If its status contains "(stopped)" string, please, press the Start button. After that normal operation of the printer should be restored. The "stopped" status might be activated when some problems in printing occurred. · Check if your application has special print option such as "-oraw". If "-oraw" is specified in the command line parameter then remove it to print properly. For Gimp front-end, select "print" -> "Setup printer" and edit command line parameter in the command item. Please avoid changing print job parameters (via LPR GUI, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks mfp port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the mfp port. The CUPS (Common Unix Printing System) version distributed with SuSE Linux 9. 2 (cups-1. 1. 21) has a problem with ipp (Internet Printing Protocol) printing. Use the socket printing instead of ipp or install later version of CUPS (cups-1. 1. 22 or higher). Note · Refer to Microsoft Windows User's Guide that came with your computer for further information on Windows error messages. Common PostScript problems The following situations are PostScript language specific and may occur when several printer languages are being used. The printer doesn't print. Note · To receive a printed or screen displayed message when PostScript errors occur, open the Print Options window and click the desired selection next to the PostScript errors section. Condition PostScript file can not be printed. Possible cause The PostScript driver may not be installed correctly. Suggested solutions · Print a configuration page and verify that the PostScript version is available for printing. · Install the PostScript driver; to installing the PS printer driver, see the Software Section. · If problem consists, contact a service representative. [. . . ] Select Graphics form the Presets' drop-down list to access the graphic features. Printer Features This tab provides options for selecting the paper type and adjusting print quality. Select Printer Features from the Presets' drop-down list to access the following features: ·Resolution(Quality): You can select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document. [. . . ]