User manual SAMSUNG ML-3560

[. . . ] This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to use of this manual. © 2005 Samsung Electronics Co. , Ltd. [. . . ] The toner cartridge is at the end of its life and the print quality lowers, you need to replace the cartridge to new one. Common Windows Problems Problem "File in Use" message appears during installation. "Error Writing to LPTx" message appears. Possible Cause and Solution Exit all software applications. Remove all software from the StartUp Group, then restart Windows. · Ensure that the cables are connected correctly, the printer is on. · If bi-directional communication is not turned on in the driver, it will also cause this message. Close all other applications, reboot Windows and try printing again. Replace Cartridge Sleeping The toner cartridge is out of its life. The printer settings or network settings are turning to their default value. The Tray 1 is open and also there is no paper in the Multi-Purpose Tray. The optional Tray 2 is open and also there is no paper in the MultiPurpose Tray. Replace the toner cartridge. When data is received, it switches to on-line automatically. Wait until restoring is complete. "General Protection Fault", "Exception OE", "Spool32", or "Illegal Operation" messages appear. "Fail To Print, " "A printer timeout error occurred, " messages appear. Reset Now Restore These messages may appear during printing. Just keep waiting until the printer finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. NOTE: Refer to Microsoft Windows 9x/Me/NT 4. 0/2000/XP/ 2003 User's Guide that came with your PC for further information on Windows error messages. Tray 1 Open Tray 2 Open Close the Tray 1 or load paper in the Multi-Purpose Tray. Close the optional Tray 2 or load paper in the MultiPurpose Tray. Common Macintosh Problems Problem The printer does not print a document from Acrobat Reader. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10. 3. 2. Possible Cause and Solution You should change the Print Method option to Print as Image when you print from Acrobat Reader. Update your Mac OS to OS 10. 3. 3 or higher. NOTE: When you encounter the problems about the optional hard disk, call for service. 7. 12 Solving Problems Common PS Problems The following situations are PS language specific and may occur when several printer languages are being used. PS errors occur, open the Print Options window and click the desired selection next to the PostScript errors section. You can also receive an error list by setting from the control panel. See page 3. 8. Common Linux Problems Problem I can't change settings in the configuration tool. I am using the KDE desktop but the configuration tool and LLPR won't start. [. . . ] Choose the number of copies you want and indicate which pages you want to print. Click Print when you finish setting the options. 37 Printer Features Setting The Printer Features tab provides options for selecting the paper type and adjusting print quality. Select Printer Features from the Presets drop-down list to access the following features: Printing Multiple Pages on One Sheet of Paper You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages. 1 2 From your Macintosh application, select Print from the File menu. [. . . ]