User manual SAMSUNG ML-5200A

[. . . ] LASER PRINTER User's Guide ML-5200A This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. © 2000 Samsung Electronics Co. , Ltd. [. . . ] All graphics can be printed as Raster images, however, some geometric shapes or patterns print faster if they are printed as Vector graphics. The vector setting usually provides faster printing speed, but some vector formatted images may not print as they appear on your computer screen, or may generate an error condition. If this happen, select the raster setting and reprint the graphic images. Halftone produces a gray appearance on the printed page using combinations of black dots. If you want to have smooth, realistic and photographic appearance, choose Fine. If your graphic images were originally scanned in through a scanner, choose Coarse. Choose Line Art for graphic images with intricate lines and fine detail like clip art graphics. Available options are High, Medium and Low. Graphic mode Halftoning Graphic Information tab Shows the software version and copyright information. If your computer has a modem installed or you are connected to the Internet over a LAN and you have configured an Internet connection, you can access Samsung Electronics web site by clicking the image above SAMSUNG WEB SITE. 2. 20 Operating your printer 02-Operating 3/2/00 9:36 AM Page 23 Printing on network printer Setting Up Host PC Printer 1. From the Start menu, select Control Panel and double-click on the Network icon. Click File and Print Sharing, check box(es), then click OK. Click Start and select Printers from Settings, then double-click your printer name (ML-5200A). Click the Sharing tab, then check Shared As, fill in the Shared Name field, and click OK. Client PC Sharing Setup 1. Open your network folder in the left column. Right-click the shared name, and select Capture Printer Port. Select the port you want, click Reconnect at log on check box, the click OK button. From the Start menu, select Settings, then Printers. Double-click your printer icon (ML-5200A). From the Printer menu, select Properties. Press the Details tab, select the printer port, then press the OK button. Operating your printer 2. 21 02-Operating 3/2/00 9:36 AM Page 24 Remote Control Panel (only for DOS users) The remote control panel (RCP) is a program that allows you to properly set up your printer to work with DOS applications. Note: After you change settings, you must send it to the printer by pressing the Send button. To run the remote control panel: 1. In the Dos prompt C:\, change the directory to PRTUTIL, 2. Type dosrcp in the command line and press the Enter key. 3. [. . . ] · Consult the dealer or an experienced radio/TV technician for help. Do not make any changes or modifications to the equipment unless specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules. Canadian radio interference regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of Industry and Science Canada. [. . . ]