User manual SAMSUNG ML-6050

[. . . ] Laser Printer User's Guide QwikLaser 6050 Copyright This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any damages, direct or indirect, arising from or related to use of this manual. All rights reserved. Trademark Notices ·QwikLaser 6050 and Samsung logo are trademarks of Samsung Electronics Co. [. . . ] Option Cassette source is available if the optional cassette is installed. Manual Feed source is used when manually feeding envelopes or other print material. With it set to Auto Select, the printer automatically selects the print material according to the print job. Use different source for first page: Click to specify different paper settings for the first and following pages of your print job, clear if you want to use the same paper settings for all pages of your print job. The paper size for all pages of the print job must be the same. Graphics Using this tab, you can change graphic mode and halftoning, select true type options, and print quality. 4-6 Operating Your Printer Finishing Using this tab, you can select job finishing mode, e. g. , Multiple pages per side and Fit to page. Printer Using this tab, you can change the printer resolution, memory setting, and print to file format. Overlays This tab displays a list of currently loaded overlays and the options to load an overlay or create a new overlay. Watermarks Using this tab, you can print texts in the foreground of a document. There are a few predefined watermarks that come with the printer driver. They can be modified or you can add new ones to the list. Using HELP Each printer driver includes comprehensive screen help that is specific to the driver's settings and options. For detailed information about each setting, click Help at the bottom of each dialog box. Operating Your Printer 4-7 Changing Printer Settings for All Documents Changing the printer settings from your program will change them for one document. If you want to make the change for all documents you print on this printer, do as follows: In Windows 3. 1x 1. From Program Manager, double-click Main. Double-click Control Panel and then Printers. Make sure that the correct printer is selected as default printer. The selected printer's Setup dialog box appears. Change the printer settings you want for all of the documents. In Windows 95/98/NT 4. 0 1. Make sure that the correct printer is selected as default printer. The selected printer's Properties dialog box appears. Change the printer settings you want for all of the documents. 4-8 Operating Your Printer Font Navigator Font Navigator is a font manager for Windows 95/98, Windows NT 4. 0, and Windows 3. 1x. It gives a quick and easy way to find fonts, install fonts, and print font samples. To access the Font Navigator, select Programs from the Start menu, and select Font Navigator. How to use "Disk Image Utility" 1. Change directory to "Diskutil". Select the language that you want to install. Follow the instruction on the screen. Operating Your Printer 4-9 Remote Control Panel for Windows/Dos The Remote Control Panel dialog box includes six tabs. PRINTER Power Save Determines the length of time the printer waits after a job is printed before it goes to a reduced power state. [. . . ] Before you install the memory option, follow the steps under `Accessing the Printer Control Board' on page 6-2. Warning: The memory option is easily damaged by static electricity. Touch something metal before you touch the memory option. 2. Avoid touching the connection points along its edge. Printer Options 6-5 3. Hold the memory option with the connection points pointing toward the connector and the notch upward. Notch Connection points 4. [. . . ]