User manual SAMSUNG ML-6060

[. . . ] ·Centronics is a registered trademark of Centronics Data Computer Corporation. ·HP, PCL5e, and PCLXL are registered trademarks of Hewlett-Packard Company. ·IBM, IBM PC, XT, AT, PS/2 are registered trademarks of International Business Machines Corporation. ·Apple, AppleTalk, TrueType, Laser Writer, Macintosh, and LocalTalk are registered trademarks of Apple Computer, inc. [. . . ] With it set to Auto Select, the printer automatically selects the print material according to the print job. Advanced Setup Using this tab, you can change graphic settings, graphic mode, gray scale, graphic quality. It also includes settings that determine how the printer handles True Type font. When you upgrade your printer memory, you have to set the correct memory size using this tab. 4-4 Operating Your Printer RCP Using this tab, you can control the following printer features: Auto Continue It determines the action to be taken when a manual feed print job is sent to the printer and there is no paper in the manual feeder. If Auto Continue option is set to ON, the printer picks up the paper from the paper cassette after 10 seconds. Otherwise, the printer waits for you to load paper in the manual feeder. Econo Mode It determines the toner quantity to use when printing. If this mode is set to ON, the printer conserves toner when printing. When the default value is OFF, it provides 100% usage. Paper Type If you use thick paper with weight of more than 42 Ib (90 gr) or envelopes, you have to insert it into the manual feed slot. Select THICK. Operating Your Printer 4-5 Samsung 6050 PCLXL driver's Properties dialog box includes 9 tabs. Paper Using this tab, you can change the paper orientation and size, and source. Source setting identifies the default paper source. If the printer is used constantly, select OFF which keeps the printer ready to print with the minimum warm-up time. This uses more energy to keep the printer warm and ready to print. Timeout Determines the amount of time in seconds the printer waits before printing the last page of a print job that does not end with a command to print the page. Econo Mode To get the most from your toner supply, set Econo Mode to ON. If you set Econo Mode to ON, print quality may be reduced. Note: Econo Mode item is available in PCL5e driver only. Jam Recovery If paper jams as it exits to the output bin, the data on the jammed page will be lost. If you set Jam Recovery feature to ON, the printer keeps the image for a printed page until the printer signals that the page has successfully exited the printer. With the feature set to OFF, the printer does not reprint a page that has jammed. PAGE SETUP Paper Size Sets the paper size. Paper Source Sets the default paper source. Lines Per Page Use this menu item to change the number of lines that print on each page. [. . . ] Your printer is shipped with 4MB of standard memory. You can install one memory option in your printer. The upgrade options available are 4, 8, 16, or 32MB. If you need to remove a printer memory before you install a new one, see page 6-7. Memory connector 1. [. . . ]