User manual SAMSUNG MM-B3

[. . . ] MICRO COMPONENT SYSTEM CD-R/RW PLAYBACK MM-B3/B4 Instruction Manual Safety Warnings B Contents Thank you for buying this SAMSUNG micro-component system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. [. . . ] Insert the pre-recorded cassette with the open edge of the tape facing downwards. Close the deck by pushing on it until it clicks into place. Press any of the following buttons during playback, as required. Listen to the same track again Listen to the next track Listen to the previous track Listen to the track of your choice Listen to the other side of the cassette Press. . . once once twice the appropriate or number of times / once (option) Synchronised recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. You do not need to adjust the volume, as it has no effect on the recording. When the display indicates. . . The micro-component system plays back. . . One side of the selected cassette and then stops. The other side of the cassette and then stops. Both sides of the cassette indefinitely until you press stop. 1 2 3 4 5 6 Switch the system on by pressing On/Standby ( Insert a blank cassette in Deck. Use the CD selection ( ). 1 2 3 4 5 6 Switch the system on by pressing On/Standby ( Insert a blank cassette in Deck. Select the TUNER function by pressing TUNER/Band. ). Select the radio station that you wish to record by pressing or button . Result: REC is displayed and recording starts. To stop recording, press Stop ( ) button. , ) buttons to select the desired song. Band Power Sound Down Tuning Mode Up REC/Pause CD Sync. Mute Counter Reset Press the CD Sync. When stopped, press the button to start the recording from the first piece of music. To stop recording, press Stop ( ) button. Repeat AB REV. Mode If there are very quiet passages on a track, the automatic search function may stop before the end of the track. Also, a very short silence between two tracks may not be detected. 1 1 Volume Volume 8 When the cassette is stopped, select one of the following functions as required. Rewind the cassette Fast-forward the cassette The cassette player stops automatically when the beginning or end of the cassette is reached. Press. . . TUNER Band EQ S. Bass EQ S. Bass Tape Counter 4 When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen. The counter is only displayed when a cassette is being played. [. . . ] · The loudspeaker wires have been disconnected. · The Mute button has been pressed. · The timer has been stopped by pressing Timer On/Off. · Press the S. Bass button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. [. . . ]