User manual SAMSUNG MM-B7 NO RDS

[. . . ] MICRO COMPONENT AUDIO SYSTEM CD-R/RW PLAYBACK MM-B7 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] PRESET function is explained in detail in the section " Selecting a Stored Station" on. Select the station to be stored by: or Pressing or buttons to increase or decrease the frequency respectively. 5 To scroll through the frequencies faster when searching manually, hold down the or buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PROGRAM is displayed for a few seconds. b Press or to assign a program number between 1 and 15. c Press Program/Set to store the radio station. Result: PROGRAM is no longer displayed and the station is stored. To store any other radio frequencies required, repeat Steps 3 to 5. Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press Mono/ST. The quality of the sound will be improved. 6 Program/ Set VOL. Tuning Mode VOL. Band The PROGRAM function can be used to assign a new station to an existing program number. TUNER O Standby/On 2 Band CD 45 Down Tuning Mode Up Mono/ST Mute 3 Volume 1 5 TAPE 45 2 VOL. Band Program/ Set 45 3 Tuning Mode 45 14 VOL. Listening to a Cassette Always treat your cassettes with care; refer, if necessary, to the section entitled "Precautions When Using Audio Cassettes" on page 23. Selecting the Cassette Playback Mode GB Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. Press REV. Mode until the appropriate symbol is displayed. 1 2 3 4 Switch the system on by pressing Standby/On ( ). The micro component system plays back. . . One side of the selected cassette and then stops. The other side of the cassette and then stops. Both sides of the cassette indefinitely until you press stop. Open the cassette deck by pushing on the corner of the cover marked Push Eject ( ) until you hear a click and then releasing it. Close the deck by pushing on it until it clicks into place. Side A Side B Result: The cassette starts playing. Press the , on the front panel or trol button if necessary. Rewind the cassette Fast-forward the cassette Press . . . [. . . ] Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc. ). TUNER Open/Close Down Tuning Mode Up Demo Standby/On Band CD TAPE Volume Phones AUX Rec/Pause REV. Mode Sound Mode MIC Push Eject Full Auto Remote Control Operation Do not place heavy items on the main lead. Main cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock. Do not remove any equipment panels. The inside of the unit contains live components, which cause electric shock. 20 Precautions When Using Compact Discs Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. [. . . ]