User manual SAMSUNG MM-C8

[. . . ] MICRO COMPONENT AUDIO SYSTEM MP3-CD/CD-R/RW PLAYBACK MM-C8 Instruction Manual Safety Warnings B Contents Thank you for buying this SAMSUNG micro component system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. [. . . ] c Press PROGRAM/SET to store the radio station. Result: PROG is no longer displayed and the station is stored. VOLUME REPEAT TUNING/ ALBUM TUNING MODE 9 To cancel the selection, press button. Once if the compact disc player is stopped Result: PROG is no longer displayed. +10 If you open the compartment, the selection is cancelled. 6 To store any other radio frequencies required, repeat Steps 3 to 5. MUTE The PROGRAM function can be used to assign a new station to an existing program number. TUNER BAND TIMER/CLOCK TIMER ON/OFF CO UNTER RESET MO/ST SURROUND XT TUNER BAND TIMER/CLOCK PROGRAM/SET REC. /PAUSE SHUFFLE TIMER ON/OFF CO UNTER RESET MO/ST SURROUND XT DEMO/DIMMER AUX SLEEP REV. MODE 3, 5 PROGRAM/SET REC. /PAUSE SHUFFLE AUX SLEEP 2 DEM0/DIMMER REV. MODE 4, 8 1, 9CD/MP3-CD VOLUME 4, 8 45 3 45 CD/MP3-CD 7 TUNING/ ALBUM 14 15 Listening to a Cassette GB Always treat your cassettes with care; refer, if necessary, to the section entitled "Precautions When Using Audio Cassettes" on page 22. Selecting the Cassette Playback Mode Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. Press REV. MODE until the appropriate symbol is displayed. Recording a Compact Disc You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording 3 GB Load a compact disc. Press the OPEN/CLOSE button ( ) to open the CD door. ) to close Insert a CD and press the OPEN/CLOSE button ( the CD door. 1 2 Switch the system on by pressing ( ). The micro component system plays back. . . One side of the selected cassette and then stops. The other side of the cassette and then stops. Both sides of the cassette indefinitely until you press stop. AUX SLEEP PROGRAM/SET REC. /PAUSE SHUFFLE CO UNTER RESET MO/ST SURROUND XT DEM0/DIMMER Synchronised recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. 4 5 Open the cassette deck by pushing on the corner of the cover marked PUSH EJECT ( ) until you hear a click and then releasing it. Insert the pre-recorded cassette with the open edge of the tape facing downwards. Close the deck by pushing on it until it clicks into place. Side A Side B Result: The cassette starts playing. Rewind the cassette Fast-forward the cassette , or , Press . . . Tape ( ) button twice. Press the MP3-CD/CD(/») button. Use the CD selection ( , ) buttons to select the desired song. Result: To stop recording, press button. 3 4 1 2 3 Switch the system on by pressing ( Insert a blank cassette in Deck. ). Press the PUSH/EJECT button ( ) to open the cassette door, insert a cassette, and then close the cassette door. Insert the cassette with the safety tabs. Press the OPEN/CLOSE button ( ) to open the CD door. ) to close 2 5 button if necessary. [. . . ] · The loudspeaker wires have been disconnected. · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the STOP ( )button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. [. . . ]