User manual SAMSUNG MM-C8DABR

[. . . ] MICRO COMPONENT AUDIO SYSTEM MP3-CD/CD-R/RW PLAYBACK MM-C8DAB Instruction Manual Safety Warnings Contents Thank you for buying this SAMSUNG micro component system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. [. . . ] · Press the PROGRAM/SET button before "STORED"disappear from the display . · If no button is pressed for 7~8 seconds, you will be exited from the Information Display function. · Small letters and some special characters (, /, =, ?) cannot be Manual Tuning If no signal can be received because the unit is being used for the first time or because you have recently moved, please set available services. longer than 2 seconds. "SCAN 00" blinks on the display and all available services will be searched. If "NO SVC " continues to be displayed after the service search has finished, make sure you are not in a non- 5 1 2 3 4 Press TUNER/BAND to select "DAB". · Each time you press the button, the mode changes as follows: FM AW DAB. · The current frequency will be shown on the display. Press , on the remote control or press , on the main reception area and check the antenna connection. About Ensemble and Service · For each ensemble, there are various services such as audio and data. If you press , when there are many ensembles, you can 6 displayed. Repeat steps 2 to 5 to store other stations. Tuning in to a Stored DAB Station · Press 1~6 on the remote control to select the stored station . · If no station is stored when you press 1~6, "NO MEMORY" will appear on the display. · With the DAB function selected, press STOP on the main unit for longer than 5 seconds. · "DAB RESET" blinks on the display and the DAB function will be reset to the default setting. · When the DAB function is reset, Auto Scan is started. To Initialize DAB unit to move to the desired frequency. · If no signal is received, "NO SVC" will appear on the display. easily search services. · Shaded areas are frequencies used currently as of March, 2005 in the UK ("United Kingdom") 1 1 2, 4 174. 928MHz 216. 928MHz 192. 352MHz 234. 208MHz 209. 936MHz 180. 064MHz 222. 064MHz 197. 648MHz 239. 200MHz 215. 072MHz 185. 360MHz 227. 360MHz 202. 928MHz 178. 352MHz 220. 352MHz 190. 640MHz 232. 496MHz 208. 064MHz 183. 648MHz 225. 648MHz 195. 936MHz 237. 488MHz 213. 360MHz 188. 928MHz 230. 784MHz 201. 072MHz 176. 640MHz 218. 640MHz 194. 064MHz 235. 776MHz 206. 352MHz 181. 936MHz 223. 936MHz 199. 360MHz 211. 648MHz 187. 072MHz 229. 072MHz 204. 640MHz 2 3 3 4 3, 5 4 16 17 About RDS broadcasting B This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc. ) to be received from the FM RDS station together with normal radio signal. About RDS DISPLAY function About "PS NAME" MODE Displays the name of broadcasting station. Press the RDS DISPLAY button to select the PS NAME. "PS NAME" appears on the display. If the PS information is being received, the PS name (BBC, AFO, NDR, etc. ) is shown on the display. If the PS information isn't received, the original FM frequency is shown. PTY(Program Type) indication and PTY-SEARCH function GB N The PTY information is composed of an identification symbol, which helps the FM radio to recognize the program type of each FM station. N The below 30 PTY information is shown on the display by pressing the Pty button. Display NEWS AFFAIRS Program Type · News including an announced opinion and report · Several matters including a current incident, documentary, discussion and analysis. [. . . ] · The loudspeaker wires have been disconnected. · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the STOP ( )button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. [. . . ]