User manual SAMSUNG MM-D430

[. . . ] MM-D430 Micro Component Audio system CD/MP3-CD/WMA-CD/CD-R/RW Playback user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register Safety Warnings ENG TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates "dangerous voltage" inside CAUTION : TO REDUCE THE RISK OF ELECTRIC the product that presents a risk of electric shock SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates important instructions accompanying the product. WARNING · To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. · To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. [. . . ] Normally, one MP3 file has a capacity of 4MB, therefore approximately 170 files can be recorded on a single disc. Regarding the playback of CD-R/RW In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status. ) The CD-RW is comparably less reflexive than CD which causes more time delay to read. Remain Function You can check the remaining time. Display Function (This function is not available during playback of an MP3/WMA-CD. ) You may check the total tracks of the disc. 1 2 Press the REMAIN button . If you press the REMAIN button, the remaining time is displayed. To cancel this function, press the REMAIN button again. 1 Press the DISPLAY button. Result: The total tracks numuber of the disc is displayed, and it will be disappeared after 3 seconds. 14 Repeating One or All Tracks on the Compact Discs You can repeat indefinitely: A specific track on a compact disc. All tracks on the compact disc selected. Programming the Order of CD Playback (This function is not available of an MP3/WMA-CD. ) You can decide: The order of the track desired to listen The track not desired to listen You can program up to 24 tracks. You must stop the compact disc player before selecting the tracks. Each time you press the REPEAT button, the repeat mode will change as follows: MP3: RPT TRK RPT DIR RPT DISC RPT SHF RPT OFF. CD: RPT TRK RPT DISC RPT SHF RPT OFF. When you wish to stop the repeat function, press REPEAT until RPT OFF is displayed. RPT TRK: Repeatedly plays the selected track. RPT DIR: Repeatedly plays all tracks in the selected folder. RPT DISC: Repeatedly plays the entire disc. RPT SHF: Plays tracks in random order. (Each track can be played one time. ) RPT OFF: Cancels Repeat Playback. 2 1 2 If the CD function is selected, stop the player by pressing Press PROGRAM/SET. Result: The following indications are displayed: . (01 = Program no. , -- -- = Track no. on the disc) 3 4 5 6 7 Select the required track by pressing the or button: Press the button to move back through the tracks. Press the button to move forward through the tracks. Press PROGRAM/SET to confirm your selection. Result: The selection is stored and To select other tracks, repeat steps 3 to 4. ) to listen to the track selection in the order is displayed. When press button one time , compact disc player is stopped, and press button again to cancel the selection. If you open the compartment or turn off the power, the selection will be canceled. If you select other functions, the selection will be canceled. 1, 2 A-B Repeat Playback You can repeatedly playback a designated section of a CD. [. . . ] · You have connected a set of earphones. · The loudspeaker wires have been disconnected. · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. [. . . ]