User manual SAMSUNG MM-DB9

[. . . ] MICRO COMPONENT DVD AUDIO SYSTEM DVD/CD-R/RW/MP3-CD PLAYBACK MM-DB9 Instruction Manual Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press Mono/ST to switch from stereo mode to mono. The quality of the sound will be improved. Improving Radio Reception 6 To store any other radio frequencies required, repeat Steps 3 to 5. The PROGRAM function can be used to assign a new station to an existing program number. Volume Color Display /Demo On/Standby REC/Pause TUNER/Band CD Synchro 2 45 Power Surround Sound Mode DVD TUNER Band AUX Mute DVD/CD TAPE Tuning Mode Sleep 1 Phones AUX CD Repeat 45 Sleep Mono/ST Open/Close S. Bass Level Mono/ST Timer/Clock Timer/On/Off Multi Jog Rec/Pause P. Surround S. Bass EQ DVD/MP3-CD/CD-R/RW PLAYBACK 3 45 Tape Mode Counter Reset Menu Open/Close DVD/CD/TUNER 23 About RDS broadcasting GB This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc. ) to be received from the FM RDS station together with normal radio signal. About RDS DISPLAY function About "PS NAME" MODE Displays the name of broadcasting station. Press the RDS Display button to select the PS NAME. "PS NAME" appears on the display. If the PS information is being received, the PS name (BBC, AFO, NDR, etc. ) is shown on the display. If the PS information isn't received, the original FM frequency is shown. 1 2 Press the On/Standby ( ) button. Receive the FM radio. See the radio receiving method on the page 23. FM and frequency are shown on the display If the received station transfers the RDS information, 'RDS' appears automatically on the display. Press the RDS Display button to select the desired RDS mode. Whenever the button is pressed, RDS mode changes as follows. PS NAME RT CT Current FM frequency Even though no RDS Display button is pressed, the reception of PS information ensues the PS name is displayed. 3 The RDS function is available only in FM broadcasting. PTY(Program Type) : Displays the type of programme currently being broadcast 2. PS NAME(Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters. RT(Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters. CT(Clock Time) : Decodes the real time clock from the FM frequency. Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases. TA(Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress. About 'RT' MODE Displays the character transmitted from the broadcasting station. Press the RDS Display button to select the RT MODE. If the RT information is being received, the received information is shown on the display. If the RT information isn't received, the "NO RT" is shown. On the display. About CT(Clock Time) Sets the time of RDS clock. [. . . ] Thickness: 1. 2 mm TAPE DECK Frequency range Signal/noise ratio Channel separation Erasing effect 125 Hz ~ 10 KHz 40 dB 35 dB 60 dB AMPLIFIER Output power Main(6 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 X 12 Watts RMS (total harmonic distortion : 10%) Center(6 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Watts RMS (total harmonic distortion : 10%) Rear(6 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 X 12 Watts RMS (total harmonic distortion : 10%) Subwoofer(4 ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 X 28 Watts RMS (total harmonic distortion : 10%) Channel separation Signal/noise ratio 45 dB 72 dB GENERAL Dimensions 240(W) x 177 (H) x 322(D) mm 33 Reference GB Note on Terminology Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc. ). With such discs, the Angle button can be used to change the angle of view for specific scenes. These numbers are recorded on DVD discs. A Title is subdivided into many sections, each of which is numbered, and specific parts of the video can be searched quickly using these numbers. [. . . ]