User manual SAMSUNG MM-UC8

[. . . ] MICRO COMPONENT AUDIO SYSTEM MP3-CD/CD-R/RW PLAYBACK MM-UC8H Instruction Manual Safety Warnings GB Contents Thank you for buying this SAMSUNG micro component system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 This Compact Disc player is classified as a CLASS 1 LASER product. [. . . ] Select USB function by using the USB/AUX button. Searching for and Storing the Radio Stations You can store up to: 15 FM stations 15 MW stations Selecting a Stored Station You can listen to a stored radio station as follows: GB Last Memory is a function that resumes playback from the last part of the previous listening when the user reselects USB function again after stopping the play, turning the power off or selecting another function. 1 2 ). Switch the system on by pressing ( ). Example: When recording a CD Press and hold the PROGRAM/SET button, LAST ON and LAST OFF are repeatedly selected. 1 2 Select the required frequency band by pressing TUNER/BAND on the front panel. the TUNING MODE button until "PRESET" is displayed. or button to select the required program. Switch the system on by pressing ( 1 2 Connect the external USB storage device to your player. `SS-REC' directory is created in the external USB storage device and the track is stored as MP3 file. If SS-REC directory was already created, the MP3 file is saved in the directory without creating another directory. Press the Play/Pause (/») button to play the CD. Press the , button to select a desired track. USB Recording (Encoding) Specifications CD/MP3-CD: 128Kbps, 44. 1KHz Cassette Tape and External Device: 64Kbps, 24KHz Radio Broadcast:64kbps, 16KHz USB Recording (Encoding) Specifications MPEG 1, 2, 2. 5 Layer 3 32Kbps~320Kbps 32KHz, 44. 1KHz, 48KHz Select the required frequency band by pressing TUNER/BAND again on the front panel or BAND on the remote control. Result: The appropriate indication is displayed: FM Frequency Modulation MW Medium Wave 3 TUNER BAND TIMER/CLOCK PROGRAM/SET TIMER ON/OFF 3 To search for a station. . . Manually Press TUNING MODE USB/AUX SLEEP MO/ST REC. /PAUSE SURROUND XT RDS PTY 3 4 COUNTER RESET REV. MODE USB REC. DISPLAY One or more times until MANUAL is displayed. Automatically One or more times until AUTO is displayed. PRESET function is explained in detail in the section " Selecting a Stored Station" on. 1 2 3 3 3 CD/MP3 CD 4 Select the station to be stored by: or Pressing or buttons on the front panel or buttons on the remote control to increase or decrease the frequency respectively. To scroll through the frequencies faster when searching manually, hold down the or buttons. The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. 5 1 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PROG is displayed for a few seconds. b Pressing or buttons on the front panel or or buttons on the remote control to assign a program number . Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press MO/ST. The quality of the sound will be improved. USB/AUX SLEEP PROGRAM/SET MO/ST SURROUND XT RDS PTY c Press PROGRAM/SET to store the radio station. Result: PROG is no longer displayed and the station is stored. 2, 4 REC. /PAUSE USB REC. DISPLAY 6 To store any other radio frequencies required, repeat Steps 3 to 5. COUNTER RESET REV. MODE The PROGRAM function can be used to assign a new station to an existing program number. CD/MP3-CD 3 VOLUME REPEAT TUNING/ ALBUM 2 TUNING MODE MUTE 45 3 45 TUNER BAND TIMER/CLOCK PROGRAM/SET MO/ST TIMER/CLOCK TIMER ON/OFF PROGRAM/SET COUNTER RESET MO/ST REC. /PAUSE SOUND MODE RDS PTY Depending on the type of the external USB storage device, recorded (encoded) file may not be played from the external USB storage device. But, the file will be played if the file is saved in the player. When recording on an external USB storage device, check to make sure that there are more than 10MB of free space. When it is less than 10MB, you will not make a recording. [. . . ] · The loudspeaker wires have been disconnected. · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the STOP ( )button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. [. . . ]