User manual SAMSUNG MM-ZJ5

[. . . ] MICRO COMPONENT SYSTEM MP3-CD/CD-R/RW PLAYBACK MM-ZJ5 Instruction Manual Safety Warnings GB Contents Thank you for buying this SAMSUNG micro-component system. Please take time to read these instructions. They will allow you to operate your system with ease and take full advantage of its features. GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. [. . . ] The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. Adjust the volume by: Turning the VOL. +, - knob on the front panel or Pressing the VOLUME+, - button on the remote control. Select the FM stereo or mono mode by pressing MO/ST on the remote control. CD/MP3-CD CD/MP3-CD VOLUME REPEAT TUNING / ALBUM / 8 TUNING MODE VOLUME REPEAT TUNING / ALBUM 8 TA P E +10 / 4 TUNING MODE +10 +10 4 4 Improving Radio Reception You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial 1 Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press MO/ST to switch from stereo mode to mono. The quality of the sound will be improved. 2, 3 5 6 4 TUNER BAND MUTE 5 TIMER/CLOCK PROGRAM/SET EQ/S. BASS TIMER ON/OFF REP. 7A MO/ST B TUNER BAND TIMER/CLOCK PROGRAM/SET EQ/S. BASS TIMER ON/OFF REP. A B MO/ST TAPE SPEED AUX SLEEP AUX SLEEP TAPE SPEED 14 15 Listening to a Cassette GB Selecting the Cassette Playback Mode 1 Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. Press REV. Mode until the appropriate symbol is displayed. Tape Counter When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen. The counter is only displayed when a cassette is being played. Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing COUNTER RESET. GB 1 2 3 4 5 6 7 Switch the system on by pressing Standby/On ( ). Select the TAPE function by pressing TAPE on the front panel. Open the cassette deck by pushing on the corner of the cover marked PUSH EJECT until you hear a click and then release it. Insert the pre-recorded cassette with the open edge of the tape facing downwards. Close the deck by pushing on it until it clicks into place. Side A TAPE ( ) once Side B TAPE ( ) twice Result: The cassette starts playing. Press TAPE SPEED to adjust the speed of the tape playing. And each time the button is pressed, the mode changes as follows. -10%SPEED +10%SPEED NORMAL 5 When the display indicates. . . The micro component system plays back. . . 4 One side of the selected cassette and then stops. 4 4 6 One side of the cassette. The other side of the cassette and then stops. Both sides of the cassette indefinitely until you press stop. AUX SLEEP PROGRAM/SET EQ/S. BASS SHUFFLE REP. A B MO/ST TAPE SPEED COUNTER RESET Recording a Radio Program MO/ST REV. MODE 8 When the cassette is stopped, select one of the following functions as required. Press. . . CD/MP3-CD You can record a radio program of your choice. [. . . ] · The MUTE button has been pressed. · The timer has been stopped by pressing TIMER ON/OFF. · Press the P. SOUND button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]