User manual SAMSUNG MMB100RH-ELS INTRODUCTION

[. . . ] MM-B100GB-1~15 RDS 5/23/03 13:50 Page 1 DIGITAL MICRO COMPONENT SYSTEM CD-R/CD-RW PLAYBACK MM-B100 Instruction Manual MM-B100GB-1~15 RDS 5/23/03 13:50 Page 2 Safety Warnings GB CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] If this happens, use the manual search mode. Function Demo VOL. + 1 4 Mode VOL. ­ 6 S. Bass 4 Adjust the volume by: Turning the VOL. + or ­ buttons on the front panel or Pressing the VOL. + or ­ buttons on the remote control Select the stereo or mono mode by pressing Mono/ST. 7 TAPE REV. Mode RDS Display PTY CD CD SYNC. 1 2, 3, 5Repeat Program/ Set 6 VOL. Tuning Mode VOL. +10 2 Function Demo VOL. + Band 4 5 Repeat 6 Mode VOL. ­ 4 4 S. Bass 6 5 +10 Mono/ST Mute Program/ Set 6 VOL. VOL. 3 5 4 Band 5 Tuning Tunning Mode Mode 7 Mono/ST VOL. VOL. 6 Mute 14 MM-B100GB-1~15 RDS 5/23/03 13:50 Page 15 Searching for and Storing the Radio Stations (continued) Selecting a Stored Station GB You can listen to a stored radio station as follows: 8 If you do not want to store the radio station found, revert to Step 4 and search for another station. Result: The PRGM is displayed for a few seconds. or to assign a programme number between c Press Program/Set to store the radio station. Result: PRGM is no longer flashed and the station is stored. 1 2 3 4 Switch the system on by pressing . Select the TUNER function by pressing Function. Select the required frequency band by pressing Band. Press the Tuning Mode button until "PRESET" is displayed. / to select the required programme. 9 To store any other radio frequencies required, repeat Steps 3 to 8. The PROGRAM function can be used to assign a new station to an existing program number. TAPE REV. Mode CD RDS Display PTY CD SYNC. 2 Repeat 8 Program/ Set VOL. Mono/ST Mute +10 Function Demo VOL. + Mode VOL. ­ Band S. Bass 8 8 1 Timer On/Off Timer/ Clock EQ/S. Bass Sleep AUX Improving Radio Reception TAPE You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial If reception from a specific FM radio station is poor, press Mono/ST. The quality of the sound will be improved. CD SYNC. REV. Mode CD RDS Display PTY Repeat Program/ Set VOL. +103 Band Program/ Set VOL. Tuning Mode VOL. Band 4 4 4 Tuning Tunning Mode VOL. Mono/ST Mute Mono/ST Mute 15 MM-B100GB-16~26RDS 5/26/03 10:06 Page 16 About RDS broadcasting GB This unit has the RDS (Radio Data System) function, which enables for the various information such as broadcasting station, radio text, time and 30 types of programs (News, Rock, Classic, etc. ) to be received from the FM RDS station together with normal radio signal. About RDS DISPLAY function About "PS NAME" MODE Displays the name of broadcasting station. 1 2 Press the button. Receive the FM radio. See the radio receiving method on the page 14. FM and frequency are shown on the display If the received station transfers the RDS information, 'RDS' appears automatically on the display. Press the RDS Display button to select the desired RDS mode. [. . . ] · The Mute button has been pressed. · The timer has been stopped by pressing Timer On/Off. · Press the S. Bass button for 5 seconds in power `OFF'(standby), then it is returned the original position (RESET) · The CD function has not been selected. · The disc has been inserted face down or is either dirty or scratched. [. . . ]