User manual SAMSUNG MONT BLANC FJM

[. . . ] features of your new air conditioner · Cool Summer Offer On those hot sweltering summer days and long restless nights, there is no better escape from the heat than the cool comforts of home. Your new air conditioner brings an end to exhausting hot summer days and lets you rest. This summer, beat the heat with your own air conditioner. · Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer, but can also be an efficient heating method in the winter with the advanced "Heat pump" system. This technology is up to 300% more efficient than electrical heating, so you can further reduce its running cost. [. . . ] The air conditioner operates in the last mode used, or in Auto mode if Dry/Fan mode is the most recent mode used. · When using the remote control, make sure the indicator matches your selection on the remote control display. · Temperature/Fan speed cannot be adjusted while using this function. · Air flow can be adjusted manually. (See page 19 for instructions. ) · When the Turbo function is activated, pressing Mode button will automatically cancel the function. 20_ using advanced functions SETTING THE TIMER This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically. On timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is on/off. Press the On button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the Up or Down button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing by 30 minute intervals up to the first 3 hours and then hourly after the first 3 hours. Press the Set/Cancel button on the remote control to activate. The remote control display will show the hour(s) you have set. The air conditioner will operate automatically at the set time and then the On timer indicator disappears. If the On timer is not set within 10 seconds, the air conditioner will end setting. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan/Heat mode. · Temperature can also be adjusted. (See step 3 on page 15 for instructions. ) · After the timer has been set and the unit is turned off, all indicators will turn off except the On timer indicator and the remaining time in approximately 10 seconds. · Change the timer setting by pressing the ON button, pressing the Up/Down button to change the time, then press the Set/Cancel button to activate. To deactivate the On timer 1. Press the Set/Cancel button on the remote control. The set time will cancel and the On timer indicator will disappear. using advanced functions _21 using advanced functions SETTING TIMER Off timer This function allows you to turn off the air conditioner automatically within the time range of 24 hours. [. . . ] Press the Temperature button on the remote control to change the set temperature. Press the Temperature or button to decrease or increase the temperature. · Check if the air filter is blocked by dirt. · Check if the air conditioner has just been turned on. [. . . ]