User manual SAMSUNG MSYS 5200 USER'S MANUAL FOR (EN) (VER.1.0)

[. . . ] Laser Printer, Scanner User's Guide Msys 5200 ELECTRONICS Internet Home Page: http://www. samsungtelecom. com P/N: JC68-00146A Rev. 1. 00 Thank you for purchasing Samsung Msys 5200the multifunction office product for your home office and the whole family. We are sure that Samsung Msys 5200 will provide all you need in one machine. Samsung Msys 5200 combines these office machines: - Plain paper fax - Copier - Laser printer - Scanner This booklet contains instructions for Laser Printer and Scanner. Refer to the Users Guide for Laser Facsimile and Copier to use your machine as a plain paper fax and copier. [. . . ] To add pages while the fax is sending, insert them into the loading slot on top of the already loaded sheets. 4. If necessary, use the Resolution button to change the resolution and the Contrast button to change the contrast (see page 2. 8). Sending a Fax 2. 9 Sending a Fax Automatically 1. After loading a document, enter the number of the remote fax machine using the number keypad. You can store one-touch or speed dial numbers so that you can dial your most frequently used numbers with one touch of a button or 2digit speed dial number. For information on storing and using numbers in memory, see page 2. 27. If you make a mistake while entering a number, move the cursor under the wrong digit by using or , and correct the number or press Delete to delete the number. 2. Press Start when the number appears correctly in the display. The machine dials the number and begins to transmit. Canceling Transmission Press Stop any time during transmission. The machine continues to send the fax and the display shows a message warning you that the machine is in use. Press Stop again. Confirming Transmission When the last page of your document has been sent successfully, the machine beeps and returns to Standby mode. If something went wrong during your fax transmission, an error message appears in the display. For a listing of error messages and their meanings, see page 3. 6. If you receive an error message, press Stop to clear the message and try to send the document again. You can set your machine to print out a confirmation report automatically each time sending is completed. For more information, see `User Options on page 2. 40. 2. 10 Sending a Fax Automatic Redial When you send a fax, if the number you have dialed is busy or there is no answer, the machine hangs up, waits for the specified retry term and redials the number. If after the specified number of retry attempts (retry count), the machine fails to connect, the machine returns to Standby mode. While the machine is redialing, the display shows RETRY REDIAL?. If you want to redial the number immediately, press Start. You can select the number of retries and the retry term between each redial attempt. 2 Operation Sending a Fax 2. 11 Voice Request If youre sending or receiving a document and need to speak to the other person during the same phone call, use Voice Request to alert the person at the remote site. You can also respond to a Voice Request made by the person at the remote end. Sending a Voice Request 1. Press V. Req while a document is being sent or received. Voice Request signal is stored and then sent to the remote fax machine after the document has been sent or received. [. . . ] If such changes or modifications should be made, you could be required to stop operation of the equipment. Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of FCC Rules. Canadian Radio Interference Regulations This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of the Industry and Science Canada. Cet appareil numZrique respecte les limites de bruits radioZlectriques applicables aux appareils numZriques de Classe B prescrites dans la norme sur le matZriel brouilleur: Appareils NumZriques, NMB-003 ZdictZe par lIndustrie et Sciences Canada. 4. 2 Appendix Laser Safety Statement The printer is certified in the U. S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. [. . . ]