User manual SAMSUNG MTR-1120U

[. . . ] User guide You're just minutes from enjoying the movies you want whenever you want them. ii © 2003 Buena Vista DataCasting, Inc. MovieBeam, (others TBD) are trademarks and registered trademarks of Buena Vista DataCasting, Inc. All other product or brand names as they appear are trademarks or registered trademarks of their respective holders. This document may not be copied, reproduced, transmitted, distributed, transcribed, stored in a retrieval system, modified or translated into any other language or computer language, or sublicensed, in any form or by any means - electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written consent of Buena Vista DataCasting, Inc. [. . . ] Right Press to move the highlight right one increment or to go to the next screen. When you are watching full screen video, this also acts as a skip forward. Down Press to move the highlight down one increment. Press and hold for fast scrolling down through lists. Finishing Setup, Renting and Watching Movies 3-7 Turning on the MovieBeam receiver and your TV The first time you plug in your MovieBeam receiver, you may hear the disk drive make some sounds as it boots up. A welcome screen will display with further instructions. The welcome screen may display for as long as 5 minutes. Your MovieBeam receiver is always powered "on. " When it is in standby mode and not sending video to your TV, the LED will be orange. You will know that the receiver is sending video to your TV if the green LED is on. If you are not getting images on your TV, find either the "Input" or "TV/VCR" button your TV's remote control. Keep pressing it until it you select the right input and the welcome page shows on your TV screen. An animated sequence will guide you through the rest of the setup. Follow the prompts to set up dialing, adjust the antenna, learn about the MovieBeam receiver's features and rent a movie. Finishing Setup, Renting and Watching Movies 3-8 Getting around the screens For the guided setup and to use all of the MovieBeam receiver's features, use the buttons on the navigation star on your remote control or on MovieBeam receiver's front panel. Press the up, down, left or right buttons to move the highlight on the screen. When the item you want is highlighted, press the Select button in the center of the navigation star. m en u select Finishing Setup, Renting and Watching Movies 3-9 Phone setup Part of the setup process involves the receiver checking the phone line and calling in to activate. If the call is successful, it will begin playing the MovieBeam receiver's features movie while the phone call is in progress. This can take up to 5 minutes. When the call is complete, continue to the antenna adjustment step. If the call is unsuccessful, you will be prompted to enter dialing parameters. Use the navigation star buttons on the remote or on the MovieBeam receiver to respond to the prompts. If the phone call is unsuccessful, call MovieBeam Customer Service (1-866-865-1500) for further instructions. When the MovieBeam receiver has successfully called in, you will be instructed on how to position the antenna. Finishing Setup, Renting and Watching Movies 3-10 Antenna setup The MovieBeam receiver checks the antenna signal. If the signal is good, you can go on to the next step. If the signal needs improvement, the MovieBeam receiver will prompt you to move the antenna until the bar on the screen extends past "good". If the bar is showing green on the ends, you are getting adequate signal. [. . . ] If you have forgotten your passcode, go to the "My Account" section on the MovieBeam website to clear it. You can also call 1-866-865-1500 and our customer service agents will be happy to assist you. Remember that once you clear your passcode on the web or over the phone, you must go to the Settings screen to force a dial in. Movie list isn't updating What's wrong The movie list is not updating. If the list of available movies doesn't change within 7 to 10 days, check your antenna signal as described on p. [. . . ]