User manual SAMSUNG NC240

[. . . ] SyncMaster NC190, NC240 LCD Monitor User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-3 INSTALLING THE PRODUCT Package Contents . 2-12 USING THE PRODUCT What is a PC over IP?3-1 Connect to the host PC using a LAN cable . [. . . ] <Green> - Displays pictures in green monochrome color. <Aqua> - Displays pictures in aqua monochrome color. <Sepia> - Displays pictures in sepia monochrome color. Using this menu, you can change the intensity of the colors of medium brightness. · <Mode1> - <Mode2> - <Mode3> <Color> feature is not available when <MagicBright> is set to <Dynamic Contrast> mode. Using the product 3-7 SIZE & POSITION Menu H-Position Description Moves the position of the display area on the screen horizontally. This function is only available in analog mode. V-Position Moves the position of the display area on the screen vertically. This function is only available in analog mode. Image Size · · <Auto> - The picture is displayed at the aspect ratio of the input signal. <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal. · · A signal not in the standard mode table is not supported. If the resolution is set to the optimal resolution, the aspect ratio does not change whether the <Image Size> is set to <Auto> or <Wide>. Menu H-Position Menu V-Position You can adjust the horizontal position of the OSD. You can adjust the vertical position of the OSD. SETUP&RESET Menu Reset Description Use this function to restore the visual quality and color settings to the factory defaults. · <No> - <Yes> Menu Transparency You can select the transparency of the OSD. · <Off> - <On> 3-7 Using the product Menu Language Select a language for the OSD. Description The selected language is only applied to the product OSD. This setting does not affect the other functions of the PC. Display Time The OSD automatically disappears if no action is taken by the user. You can determine the time to wait before the OSD is hidden. · <5 sec> - <10 sec> - <20 sec> - <200 sec> INFORMATION Menu INFORMATION Description Shows the frequency and resolution set on the PC. Using the product 3-7 4 4-1 Installing the Software PCoIP On Screen Display (OSD) The On Screen Display (OSD) local GUI (Portal only) is displayed to the user when the device is powered on and a PCoIP session is not in progress. The OSD provides a mechanism to connect to a host device via the Connect Screen. The Connect Screen is presented to the user on startup. The Connect Screen also allows access to the Options Window. The Options Window provides a subset of the functionality provided by the Administrative Web Interface described in Section 1. The Options Window is accessible through the <Options> button on the Connect Screen. An administrative password is required to change Portal options. Installing the Software 4-1 Connect Screen The Connect Screen is shown on startup except when the Portal has been configured for a managed start-up or auto-reconnect. [. . . ] Install the device driver referring to the descriptions about the driver installation. Install the device driver referring to the descriptions about the driver installation. A "beep, beep" sound is heard when booting the computer. If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer. Problems related to Audio No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. [. . . ]