User manual SAMSUNG NP-G10

[. . . ] Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] If you select 'Yes', the network settings for the added location are applied. When the network settings for the added location are applied, the added place and the corresponding network connection information is displayed in The detailed Information for window. When the network setting is complete, an icon for the added location is created within the Saved Locations window. Now you can use the Internet or add a new network location. Menu Current Place Information Saved Locations 74 Users Manual Wireless LAN AP Connection Procedures To use a wireless LAN, first connect to a wireless LAN AP and then you can access the network even when moving location. Or moving location and then you can access the network even when connecting to a wireless LAN AP 1. Right-click over the Wireless Network Connection ( bar and click View Available Wireless Networks. Click Search AP from the Wireless menu to search for wireless LAN APs. Select an available wireless network (e. g. For information on available wireless LAN APs, ask your network administrator. Available AP Connect 3. The network key (security key) input window appears. - If a network key has been set for the wireless LAN AP, enter the network key and click the Connect button. For the network key information, ask your network administrator. - If no network key has been set for the wireless LAN AP, click the Connect button without entering the network key. When the computer is connected to the wireless LAN AP, the Connected message will appear on the Wireless Network icon in the Taskbar. Using the network after moving location By setting the network settings (IP address, printer setting, etc. ) for each location, you can immediately access the network without performing the network setting procedures regardless of your location. Run Samsung Network Manager when connected to the Internet. Connecting to the Internet 75 2. Select an icon that represents the corresponding location from the Saved Locations window and then click Move. When the network settings of the selected location are applied, the new location and the network connection information are displayed in The detailed Information for window. Sharing Internet Access This section describes the procedures to share Internet Access. To share Internet Access, you first have to set a sharing server and a sharing client. When the setup is complete, you can access the Internet from the sharing client by connecting to the sharing server. Sharing Server : A computer with a direct connection to the internet and a local network connection. Sharing Client : A computer that uses the Internet by connecting to a sharing server without itself having a direct connection to the Internet. You can connect a sharing server and a sharing client as follows. (See Figure 5 on page (p73)) Sharing Server External Internet Device Connection 1 Connection 2 Connection 3 Wired LAN Wireless LAN Wired LAN Client Device Wireless LAN Wired LAN Wired LAN Connect a sharing client with the device that is the same as the client device of the sharing server. Sharing Client For Connection 3, you have to connect a LAN card in advance. To connect a sharing server and a sharing client using a wired LAN, connect the computers with a crossover LAN cable or network hub first. [. . . ] With this type of operating system, you normally do not need to set jumpers on devices or set memory addresses or IRQs. RAM (random access memory) The computer's system memory, including conventional and extended memory. Information stored in RAM is temporary, and is erased when the system is turned off. Refresh rate The refresh rate is the rate at which the image on the LCD screen is rewritten to the screen. [. . . ]