User manual SAMSUNG NP-M70

[. . . ] Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] Confirm the settings and click the Next button. When the Printer Setting window appears, click Finish. For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 89 When the Shared Server setting is completed, set up the shared client. Setting Up the Sharing Client 1. Run Samsung Network Manager on the computer to be used as a sharing client. Select a network location icon and enter the name of the location. Select Internet Sharing and click the Next button. - To connect through a wireless LAN, select Internet Sharing - Wireless. - To connect through a wired LAN, select Internet Sharing - Wired. 5. Confirm the network device to be connected to the server and click the Next button. - To connect through a wireless LAN, enter the wireless connection name (e. g. Samsung) you entered in the sharing server. If you have set a network key (security key) for the sharing server, enter the network key. 6. Confirm the information and click the Next button. Connecting to the Internet 95 7. When the Printer Setting window appears, click Finish. For the printer setup procedures, refer to the description of item 7 of "Setting Up a Network" on page 89 When the settings are completed, you can use the Internet on the shared client. - To access the Internet from the sharing client, the sharing server has to be on. - To use the Internet on the sharing client, select a sharing client icon from the Location List window and then click the Move button. - If the connection is broken while using the Internet on the sharing client, click the Ap Active from the Wireless menu to reestablish the connection. Network Status Diagnosis You can diagnose the network status when the network is not properly connected. Select Auto Diagnosis from the Manage menu. The Network Connections figure window appears. Click the Start button to start the network diagnosis. When the diagnosis is complete, out of order devices are marked by the exclamation mark icon. For detailed device status, read the description in the lower part of the window. Reconnect and set up the device according to the diagnosis result. 96 Users Manual Using Network Services While the computer is connected to the network, you can use network services to share files, folders, and printers. Network services are provided for the computers that are connected to the network through wired or wireless network connections. For details, see "Connecting Through a Wired LAN" on page 77 and see "Connecting Through a Wireless LAN (Option)" on page 79. Sharing files or folders This section describes how to share files and folders between computers connected to the network. [. . . ] With this type of operating system, you normally do not need to set jumpers on devices or set memory addresses or IRQs. RAM (random access memory) The computer's system memory, including conventional and extended memory. Information stored in RAM is temporary, and is erased when the system is turned off. Refresh rate The refresh rate is the rate at which the image on the LCD screen is rewritten to the screen. [. . . ]