User manual SAMSUNG NP-P29K001/SEB

[. . . ] P28/P29 3. 5 Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] A Some USB devices that have unstable signal properties may sometimes not be recognized by a PC when the device is inserted into the USB port of the system or the system restarts from power-saving mode. In this case, remove the device and try inserting it again. 86 Users Manual Display Related Q1 The LCD screen is blank. Use the <Fn+ >, <Fn+ > keys. Q2 The screen saver disturbs screen viewing during Media Player or video file operation. A Under the Media Player Options, in Player > Enable Screen Saver During Use, uncheck the box and restart the player. Q3 When the Dual View (extended monitor) feature of connecting to an external monitor is available in the Windows 2000/XP environment, setting the screen resolution of the external monitor to less than that of the LCD may cause it to not display correctly. A When using the dual view feature, degrading the resolution of the external monitor when compared to the LCD may cause it to display incorrectly. Set the resolution of the external monitor to higher than or equal to that of the LCD. Q4 The following may cause a temporary blinking or distortion on the screen. (a changed resolution or display device, a removed AC adaptor or a system restart) A In these cases, the system detects and examines which external device your video driver is associated with. During this inspection, the external display device may display a momentary blinking or distortion. Q5 When I connect a projector, and change the setting to display screen image on both the LCD and the projector by pressing <Fn>+<F4 / > keys, screen is not displayed properly. A Press <Fn>+<F4 / > keys once again. Q6 The desktop momentarily appears as a broken image when zooming in or out of the Media Player screen when Media Player is running. A Since zooming in or out of the Media Player screen changes the screen resolution, the desktop may momentarily appear as a 'broken image' during this operation. Troubleshooting 87 Q7 Execution of a DOS command such as DIR causes the desktop to momentarily appear as a broken image when using the system in 2-byte character language DOS mode. A This may happen when you have configured the display in such a way that the screen is displayed to both the LCD and CRT screens simultaneously. To avoid this, configure the screen as either LCD or CRT. (See (p 66). ) Q8 The 'Turn off monitor' function configured in the Power Management does not work while using the system in full screen DOS mode A The 'Turn off monitor' function may not work in full screen DOS mode. (See (p 70). ) Q9 A DVD or MPEG movie only displays on the LCD screen. A When using both the LCD and the CRT monitors to display a movie simultaneously, only one of the two is available. Use the right touchpad button on the desktop and select Properties. In the [Display Property] dialog box, click Settings > Advanced > Overlay and go to Clone Mode Option. In the Overlay Display Mode setting tab, select "All Equal". Now you can see the movie on both the LCD and the CRT monitor at the same time. Q10 When I connected a TV, some programs, such as Mem, do not run properly in Full-DOS Screen. A When you are using a TV as display device, some programs, such as Mem, may not run properly in Full-DOS Screen. [. . . ] лҡ͸ԺѺõԴҵðҹ ԡ Yes õԴ駨 кʵѧҡҹ˹ ա͡ Quick Installation õԴ駨зӵ鹷 3 ͹еԴ Windows ѵѵ Quick Installation ᷹ѹͧ Windows ѧ鹨֧ͧԴ;पѹҧ 4. ѧҡͧʵ лҡͤ Press any key to boot from CD 㹢й ѧҡ鹨лҡ˹Ҩ͡˹Ҥ͹ԡ ҡͧ¹ŧ觾Ԫѹ 顴 <Enter> ä͡á˹Ҥ͹ԡԪѹ?Partition configuration Ϳѧѹ촴ʡ͡˹ Ԫѹ Ӥ- ¹Ԫѹźҡ촴ʡ 5. ͡ѺԴкԺѵԡ Windows źѹͧ Windows еԴŧѨغѹ 顴 <L> 鹾 ҡس ESC ͡ ѺõԴ աҧѺõԴ Windows Ҩ˵طԴúٵͧ (dual booting) 6. [. . . ]