User manual SAMSUNG NP-P50

[. . . ] Notices No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, mechanical photocopying, recording or otherwise, without the prior written permission of the manufacturer. The information within this manual is subject to change without notice. The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material. Microsoft Windows is a registered trademark of the Microsoft Corporation. [. . . ] When the remaining battery charge is under 3%, the computer automatically saves current work and turns off. This may be different according to the settings in Control Panel > Performance and Maintenance > Power Options > Alarms tab. System Management 111 Extending the battery use time Decreasing the LCD Brightness Decreasing the LCD brightness by pressing the <Fn>+< > key combination on the keyboard or adjusting the brightness in the Battery Manager program extends the battery use time. Decreasing the LCD brightness by one level extends the battery use time by 3~5% (10~20 minutes). (The battery use time is determined by the corresponding model. ) Using the Battery Manager Battery Manager is a power management program that enables using battery power efficiently. You can easily change the power mode by selecting an optimized power mode and manually optimizing the battery use time by setting each option. Click on Start > All Programs > Samsung > Samsung Battery Manager > Samsung Battery Manager. Change Power Mode Power Saving Effects You can only change the detailed configuration in Custom Mode. Maximum Battery Saving Mode : This mode is appropriate for conditions which require the maximum battery use time. This may degrade the performance of the system. Normal Mode : This mode is appropriate for normal conditions. Both system performance and battery use time are optimized. 112 Users Manual Maximum Performance Mode : This mode is appropriate for conditions that require maximum system performance. Therefore, the battery usage time may be reduced in this mode. Custom Mode : In this mode, a user can configure a detailed configuration to save the battery usage time. You can adjust the LCD brightness, the system standby time, the screen color quality, and the graphic mode values. Power Saving Effect This shows the relative battery use time for each power mode. The more effective the power saving, the longer the graph will appear. When Running a Game or Multimedia Application A game or multimedia application may not work smoothly in Maximum Battery Saving Mode. Using this is recommended when the AC adapter is connected or in Normal or higher modes. Turning Off Unnecessary Devices Turning off unnecessary devices extends the battery use time. Select the Start > Control Panel > Performance and Maintenance > System > Hardware tab and click Device Manager. Right-click a device you are not using, and select 'Disable' (e. g. wireless LAN, 1394 , etc. ) Battery Calibration If you charge/discharge the battery repeatedly for only a short time, the battery use time may be reduced by the difference between the actual battery charge and the remaining charge display. In this case, the actual battery charge and the remaining charge display will be same by discharging the battery completely using the Battery Calibration function, and then recharging it again. Disconnect the AC power adapter after turning off the system. Restart your computer and press <F2> to enter BIOS setup. Using the arrow keys, highlight Smart Battery Calibration in the Boot menu. The Battery Calibration function is activated and the battery is discharged forcibly. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge. When the calibration process is complete, recharge the battery fully. System Management 113 Upgrading Memory This computer has one or more 256 MB or 512 MB memory module(s). [. . . ] ͧʴ Press any key to boot from CD ͧ ͤسʡͻͧ Windows ¶֧Դó 蹫մ system recovery ͡Դ ;पѹҧ ҡ红 System Software 134 ͼ ҡسöѹ Windows ҡسöѹ Windows سͧͧ蹫մ system recovery Դ Windows ҡس ͧ蹫մ system recovery سöԴ Windows ͡ user installation ҹ öԴ͡ standard installation 1. ҡҡͤ仹鹷˹Ҩ 顴 鹾 Press any key to boot from CD. . . . . ͤлҡ੾աá˹աú٨ҡÿմҹ ҡҡͤ ˹Ҥ͹ԡÿմػóáѺú ´ "¹ӴѺú" ˹ 88 3. 㹢й ѧҡ鹨лҡ˹Ҩ͡˹Ҥ͹ԡ ҡͧ¹ŧ觾Ԫѹ 顴 <Enter> 4. ͡кͧ ( format ) ѡк 顴 <Enter> 5. ͡ѺԴкԺԡ Windows źѹͧ Windows ԴŧѨغѹ 顴 <L> 鹾 6. [. . . ]