User manual SAMSUNG NP-QX310

[. . . ] If you want to move to the currently selected channel, press the ENTERE button. All Information * It may differ depending on the model. English UsingChannelmenu(WatchTV) O MENUmSupport ContentsHome ENTERE Press the CONTENT button to select WatchTV, then select the desired menu. Each screen will be displayed. Guide(Australia & Singapore) Guide The EPG (Electronic Programme ScheduleManager Guide) information is provided by ChannelList broadcasters. Using programme ChannelManager schedules provided by broadcasters, you can specify programmes you want to watch in advance so that the channel automatically changes to the selected programme channel at the specified time. Programme entries may appear blank or out of date depending on a channel status. [. . . ] ClockSet: Set the Day, Month, Year, Hour and Minute manually. N Available only when ClockMode is set to Manual. TimeZone (Australia only): Select your time zone. N This function is only available when the ClockMode is set to Auto. English UsingtheSleepTimer O MENUmSystemTimeSleepTimerENTERE SleepTimer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). N To cancel SleepTimer, select Off. SettingtheOn/OffTimer O MENUmSystemTimeOn Timer<or>OffTimer ENTERE Setup Once Sun OnTimer1 Mon Tue Wed Thu Fri Sat OnTimer1/OnTimer2/OnTimer 3: Three different on timer settings can be made. You must set the clock first. OnTime 04 00 Volume 20 Source TV Antenna ATV Channel 3 LMoveUAdjustEEnterRReturn English Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. N The c mark indicates the day you've selected. OnTime: Set the hour, minute. Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV) Antenna (when the Source is set to TV): Select ATV or DTV. Channel (when the Source is set to TV): Select the desired channel. Music/Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files to be played when the TV is turned on automatically. English N NOTE If there is no music file on the USB device or the folder containing a music file is not selected, the Timer function does not operate correctly. When there is only one photo file in the USB device, the Slide Show will not play. If a folder name is too long, the folder cannot be selected. Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders assigned to each USB have different names. It is recommended that you use a USB memory stick and a multi card reader when using OnTimer. The OnTimer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some manufacturers because these devices take a long time to be recognized. English OffTimer1/OffTimer2/OffTimer 3: Three different off timer settings can be made. BootLogo(Off/On): Display Samsung logo when the TV is turned on. TVname for LED 5 series 32-46 inches : Make changes the TVname. N If you select UserInput, you can make TV name manually. English Anynet+(HDMI-CEC) For details on set up options, refer to the "Anynet+(HDMI-CEC)" instructions. English DivXVideoOnDemand Shows the registration code authorized for the TV. If you connect to the DivX web site and register, you can download the VOD registration file. If you play the VOD registration using MyDownloads, the registration is completed. N For more information on DivX VOD, visit "http://vod. divx. com". NetworkRemoteControl for LED 5 series 32-46 inches Turn on/off or give permission to Samsung mobile phones devices to connect with and control the TV. You must have a Samsung Mobile phone/device which supports Network Remote Control. For more details, refer to each device's manual. English SupportMenu O MENUmSupportENTERE e-Manual You can read the introduction and instructions about the TV features stored in your TV. N For the detailed information about e-Manual Screen, refer to "How to use the e-Manual" in User Manual. English SelfDiagnosis N SelfDiagnosis might take few seconds, this is part of the normal operation of the TV. PictureTest(Yes/No): Use to check for picture problems. SoundTest(Yes/No): Use the built-in melody sound to check for sound problems. N If you hear no sound from the TV's speakers, before performing the sound test, make sure SpeakerSelect is set to TVSpeaker in the Sound menu. N The melody will be heard during the test even if SpeakerSelect is set to ExternalSpeaker or the sound is muted by pressing the MUTE button. SignalInformation: (digital channels only) HDTV channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. Troubleshooting: If the TV seems to have a problem, refer to this description. N If none of these troubleshooting tips apply, contact the Samsung customer service centre. English SoftwareUpgrade SoftwareUpgrade can be performed by downloading the latest firmware from "www. samsung. com" to a USB memory device. CurrentVersion the software already installed in the TV. N Software is represented as "Year/ Month/Day_Version". SoftwareUpgrade CurrentVersion 2011/01/18_000001 ByUSB ByOnline ByChannel AlternativeSoftware StandbyModeUpgrade ----/--/--_-----:Off UMoveEEnterRReturn * It may differ depending on the model. English InstallingtheLatestVersion ByUSB: Insert a USB drive containing the firmware upgrade file, downloaded from "www. samsung. com, " into the TV. [. . . ] A "ModeNot Supported" message appears. Check the supported resolution of the TV, and adjust the external device's output resolution accordingly. There is a plastic smell This smell is normal and will dissipate over time. from the TV. English Issues SolutionsandExplanations This function is only available with digital channels from The TV Signal Information is an Antenna / RF / Coax connection. unavailable in the Self Diagnosis Test menu. TV is tilted to the right or left side. Remove the base stand from the TV and reassemble it. Make sure the TV is placed on a flat surface. [. . . ]