User manual SAMSUNG NP400B5BH

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] *compatible with CPRM. DVD-RAM/-RW(VR mode) · This mode involves multiple editing functions (such as deletion of the whole title, partial deletion of a title, etc. ). · Various editing options using a created Playlist. DVD+RW · You can also make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. (see pages 82~83. ) English - 49 Content Protection for Recordable Media (CPRM) CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD has a unique 64-bit media ID etched in the BCA(Burst Cutting Area). When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc. If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable. Recording the current TV program you are watching Before you start 1. Check to make sure the antenna cable is connected. Check that the disc has enough available space for the recording. Adjust the recording mode. About the INFO button 1 2 The INFO function allows you to view the current status and progress of playback and recording. Recording will stop automatically if there is no free space left for recording. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 49 titles onto a DVD+RW/+R disc. Recording will stop automatically if a copy protected image is selected. DVD-RAM/DVD±RW/ DVD+R discs must be formatted before starting to record. Do not use DVD-R authoring discs with this unit. 1 2 3 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. Wait until "LOAD" disappears from the front panel display. If an unused DVD-RW disc is inserted, the message "Uninitialized Disc Do you want to initialize this disc?" will appear (See page 49) s s s s Recording Press the INPUT SEL. button to select the input source according to the connection you made. The front panel display changes in the following sequence: s © Channel Number © AV1 © AV2 © DV If you've connected a digital camcorder, press the INPUT SEL. (See page 53) 4 Press the REC MODE button repeatedly, (or press the REC MODE button and then press the . . . button) to select the recording speed(quality). © SP © LP © EP © XP Record Mode XP (01:11) 52 - English Copying from a Camcorder You may control a Digital Camcorder using the IEEE1394 (DV) interface. 5 6 Select the PLAY ( ) icon on the upper part of the screen to playback the camcorder and find the starting position to copy. To start recording, select REC( q ) icon in the top side of the screen using the oe buttons, then press the ENTER button. To stop recording Before you start Check that the disc has enough available space for the recording. [. . . ] You could not unfinalize the disc because of error detection. The disc cannot be played, Please check the TV system. The disc can be neither played nor recorded. Solution / Explanation You can't record the video since it is protected by copyright. Disc you are using is protected. To record on this disc or use this function, cancel the disc protection function. [. . . ]