User manual SAMSUNG NP530U3BI

[. . . ] Otherwise, the picture may not display or a connection error may occur. y PC/DVI AUDIO IN input is not supported. y For an HDMI to DVI cable connection, you must use the HDMI IN 1(DVI) jack. y For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 1 jack on the TV. [. . . ] Before you begin, make sure you have connected the TV to an antenna or a cable connection and that the TV is plugged in. See "Connections" for instructions. To begin Plug and Play, press the POWER button on your remote. Plug & Play is available only when the Input source is set to TV. See "Changing the Input Source". Plug & Play Select Language of the OSD. Language English Español Français 1. Start Screen Select a Language After you press the Power button, the Start Screen appears. Press the ENTERE button on your remote to continue. On the Language screen, press the ENTERE button. Use the /buttons to select a language, and then press ENTERE again. EEnter U Move Plug & Play Select `Home Use' when installing this TV in your home. 2. Select the Home Use Mode On the Home Use screen, press ENTERE to select the Home Use mode. Store Demo mode is for retail environments only. Store Demo Home Use L Move EEnter Plug & Play Select the Antenna source to memorize. Select the Antenna Source On the Antenna Source screen, select the source of your TV signal. View the HD Connection Guide EEnter m Skip See the best way to connect a cable or satellite box for the highest quality HD pictures. Press the ENTERE button to close the guide. Press the ENTERE button. To set or unset Store Demo mode outside of Plug & Play, press and release the Controller when the power is on. Push the Controller to the left (to MENU (m)) and hold for more than 5 seconds. To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the right (to Source( )) and hold for more than 5 seconds. 6. Changing the Input Source Source List When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable box or STB satellite receiver, you need to change the Source. Use the / buttons to select an external input source. TV / AV / Component / HDMI1/DVI / HDMI2 You can only choose external devices that are connected to the TV. In the Source List, connected inputs are highlighted. How to Use Edit Name Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when the Source List is displayed The following selections appear under Edit Name: VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Select the name of the device connected to specific input jacks to make your input source selection easier. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI 1 in Edit Name. If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI 1 in Edit Name. [. . . ] Select an option by moving the Controller to the right. Move the Controller to the right or left, or backwards and forwards to make additional selections. To change a parameter, select it, and then press the Controller. With the Function menu visible, open the Source List ( ) by pushing the Controller to the right. [. . . ]