User manual SAMSUNG NV30MP0350

[. . . ] Product names mentioned herein are for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies. Macrovision Statement If your computer has a DVD drive and an analog TV Out port, the following paragraph applies: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] System Setup Navigation Keys Navigation Key <F1> <Esc> <Left Arrow> or <Right Arrow> <Up Arrow> or <Down Arrow> <F5> or <F6> <F9> <F10> <Enter> Function Displays the General Help window. Moves the cursor up and down between fields. Changes Values Sets the parameters for the current menu to their default values. Executes commands or opens a submenu. Using System Setup 57 Changing Booting Priority The Boot menu in System Setup enables you to select the booting device and to set booting options. Boot Device Priority field enables you to select the order in which the computer attempts to boot from different devices. The field has 3 options: DVD/CD-ROM Drive, Removable Devices and Hard Drive. To change the booting device priority, choose the device positions by completing the following: 1. At startup, press <F2> to open System Setup. Use <Right Arrow> to select Boot menu. Highlight the 1st Boot Device option with <Up Arrow> or <Down Arrow> keys. Press <F5> or <F6> until the option is moved to the desired position. Click the Power Schemes tab to display the basic power management options. Power Schemes Tab 4. Select the time that you wish each of the following actions to occur in Battery and AC power mode. · · · · Turn off monitor: Turn off hard disks: System standby: System hibernates: Turning off the monitor and HDDs will save a substantial battery power, therefore when in battery only mode select the shortest time practical. a Hibernate Mode (Power Management or Manual Method) When hibernation is used, your computer turns off and when you power up again, everything is restored exactly as you left it--including programs and documents you may not have saved or closed. Everything in memory gets saved to the HDD, and the monitor and hard disk get turned off. 62 Users Manual If You Reinstall Windows You should re-establish hibernate in power options by opening Power Options Properties window and click on the Hibernate tab then click "Enable Hibernation". Hibernate Tab Frequent Interruptions: If you experience frequent interruptions, you might also consider putting your computer into automatic hibernation after a specified number of minutes using the power management options. a Standby Mode (Power Management or Manual Method) Standby is used mainly for conserving battery power in your notebook computer. It also gives you the benefit of getting right back to your work without waiting for the computer to restart. Standby turns off your monitor and hard disks, placing your entire system in a low-power state. When you return to your computer, restores your desktop exactly as you left it. It is recommended that you do not enter standby mode with less than 20% battery power. Click OK to set your power management options and close the window. Standby Key: The manual <Fn+F4> key combination will not activate Standby or Hibernate modes whilst you are playing a multimedia program or have an active USB device connected. Using Power Management Options 63 Advanced Power Management Schemes This section discusses the advanced power management schemes. There are two buttons that you can use to manually conserve power. To enter the power management window complete the following: 1. [. . . ] Resolution is measured by the number of pixels the computer's screen can display. For example, a resolution of 800 x 600 means that the screen can display 800 pixels in row and can display 600 rows. The more pixels displayed, the higher the resolution and the better the image. ROM (read-only memory) Permanent computer memory dedicated to a particular function. [. . . ]