User manual SAMSUNG OMNIA2

[. . . ] GT-I8000 extended usage guide About this guide This online-only guide contains additional procedures and usage tips that may be helpful when using your Samsung mobile phone. This guide is intended to enhance your mobile experience and is not intended as a substitute for the printed user manual. Please refer to the user manual provided with your device or the help system on your device for information not contained in this extended usage guide. 2 Instructional icons Before you start, familiarise yourself with the icons you will see in this guide: Warning ­ situations that could cause injury to yourself or others Caution ­ situations that could cause damage to your device or other equipment Note ­ notes, usage tips, or additional information Refer to ­ pages with related information; for example: p. 12 (represents "see page 12") > Followed by ­ the order of options or menus you must select to perform a step; for example: Tap Start > Settings (represents Start, followed by Settings) Square brackets ­ device keys; for example: [ (represents the End/Power key) ] [] 3 Contents Using your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The video editor will extract the files you have selected. Tap . Tap the name of an audio file. The audio file must be at least 10 seconds long. 9 Tap . 11 Continue customising your storyboard. 14 Tap to save the video. · The device will display information for the video, including the file's location, size, and length. 15 Tap . 35 Add images or videos While customising a storyboard, you may want to add a file. To add an image or video to a storyboard, 1 2 3 From the storyboard, tap . Tap thumbnail images to select photos or videos to add to the storyboard. to return to the storyboard Delete or change the order of images or videos While customising a storyboard, you may want to remove a file or change the order of files. To delete an image or video from a storyboard, 1 2 From the storyboard screen, tap . Tap thumbnail images to select photos or videos to delete from the storyboard. 36 3 4 5 Tap Tap . to return to the storyboard When you are finished, tap screen. To change the order of an image or video from a storyboard, 1 2 3 4 From the storyboard screen, tap . appears. Tap and hold an thumbnail image until Drag the thumbnail image to the position you want. to return to the storyboard Set the viewable duration of an image Setting the viewable duration of an image allows you to specify how long that image will display in the video. To set the viewable duration, 1 From the storyboard screen, scroll to an image and tap the thumbnail. 37 2 3 4 5 Tap . Drag the sliders to adjust the duration. The minimum duration is 1 second and the maximum duration is 30 seconds. Tap . to return to the storyboard When you are finished, tap screen. Crop a video while customising a storyboard While customising a storyboard, you can crop videos that you have added to the storyboard. To crop a video, 1 2 3 4 From the storyboard screen, scroll to a video and tap the thumbnail. at the point where the new video should start. 38 5 6 7 Tap Tap at the point where the new video should stop. to return to the storyboard When you are finished, tap screen. Record audio and add it to images or videos While customising a storyboard, you can add audio to images and videos by recording audio directly from the Dubbing utility or by attaching a pre-recorded audio file to an image or video. You can only record audio for the duration that the image or video is set to display. To change the duration, see Set the viewable duration of an image or Crop a video while customising a storyboard. 1 2 3 From the storyboard screen, scroll to an image or video and tap the thumbnail. Tap . Tap a point on the progress bar where the audio should begin. 39 4 5 6 7 Tap Tap Tap and record your audio. at the point where the audio should stop. to return to the storyboard When you are finished, tap screen. Attach pre-recorded audio to images or videos While customising a storyboard, you can add audio to images and videos by recording audio directly from the Dubbing utility or by attaching a pre-recorded audio file to an image or video. You can only record audio for the duration that the image or clip is set to display. To change the duration, see Set the viewable duration of an image or Crop a video while customising a storyboard. 1 2 From the storyboard screen, scroll to an image or video and tap the thumbnail. Tap . 40 3 4 5 Tap a point on the progress bar where the audio should begin. [. . . ] · Main Storage: view available Main Storage memory and programs currently stored in the Main Storage memory. · My Storage: view available My Storage memory and delete data from My Storage. · Storage Card: view available external card memory and format the memory card. · Clear Memory: delete all data and reset all settings to the manufacturer's defaults. 83 Advanced Settings System ClearType Enable or disable the ClearType feature. [. . . ]