User manual SAMSUNG PL50A550

[. . . ] Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2 2. Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the 1. Press the MENU button to display the menu. [. . . ] Press the or button to select Channel, then press the ENTER button. Storing Channels Automatically TV Air/Cable Auto Program Channel Manager Fine Tune Color System Channel : Air 2. Press the or button to select Auto Program, then press the ENTER button. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. · All available analog channels are automatically stored in memory. · It takes approximately 3 to 10 minutes to memorize channels. : Auto Move Enter Return Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. Poor picture quality. No picture or sound. ·Try another channel. ·Adjust the antenna. ·Try another channel. ·Move the computer's mouse or press any key on the keyboard. ·On your equipment check (STB, DVD, etc) ; Power and Signal Cable. ·The TV is using its power management system. ·Press the Source button on the panel or remote control. Although the TV caption shows · he HD(High Definition) caption that appears when switching channels or when T HD, the visual quality is not pressing the Information button on the remote control means the selected channel satisfactory. If the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. A distorted picture appears in ·f Just Scan is selected in some external devices, a distorted picture may appear in the I the corner of the screen. This symptom is caused by external devices, not the TV. ·This is caused by minor systems operation and is not a defect. [. . . ] ·This is caused by minor systems operation and is not a defect. The "Resets all settings to the · his appears when you press and hold the EXIT button for a while. The product T default values" message appears. [. . . ]