User manual SAMSUNG PL50C430A1M

[. . . ] To make a selection, press the ENTERE button. To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps: Front Rear Most cable systems are Standard(STD) systems, If you are not sure about what kind of cable system you have, contact your cable company. 2 1 If your TV is attached to a cable or satellite box, skip Steps 3 through 5. [. . . ] Install two AAA batteries. 4 The TV memorizes the available quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section. Plug & Play Auto Program in Progress. DTV Air : -DTV Cable : -Air : -Cable : -Cable : 35 48% Stop E Enter m Skip 1 Using your remote control, Plug & Play Select Language of the OSD. Language : English Español Français U Move E Enter P channels. This process can take up to 45 minutes. If You Want to Rerun Plug & Play 1. Press the SOURCE button on your remote, then select TV mode. Press the MENU button on your remote to display the menu. Press the or button to select Setup, and then press ENTERE button. Press ENTERE again to select Plug & Play. select the language for the On Screen Display (OSD), and then press ENTERE button. Make sure to match the + and ends of the batteries to the diagram in the battery compartment. 3. Replace the cover. 2 Select Home Use, and then VHF/UHF Antenna Antenna Cable (Not Supplied) Plug & Play Select `Home Use' when installing this TV in your home. 5 After the TV has memorized Plug & Play Set the Clock Mode. With the power on, press the MENU button on your remote. The menu's left side has the following menu options: Picture, Sound, Channel, Setup, Input, Application and Support. Press the or button on your remote to select a menu option, and then press the ENTERE button. When done using the menu, press the EXIT button on your remote to exit. A B C S. MODE A S. MODE P. MODE P. MODE To change the Picture Mode, follow these steps: 1. With the TV on, press the TOOLS button on your remote. Using the or on your remote, select Picture Mode. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. Press the EXIT button to exit the menu. Selects the on-screen menu items and changes the values seen on the menu. Buttons used in the Channel list, Media Play (USB) menu, etc. A S. MODE P. MODE Exits the menu. B SLEEP P. SIZE D D Setting the Clock Before you can use your TV's On/Off Timer, you must set the clock. To set the clock, follow these steps: 1. Turn on your TV, press the MENU button on your remote, then select Setup Time. [. . . ] MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast). P. MODE: Press to select the picture mode. CC: Controls the caption decoder. BSLEEPC SLEEP P. SIZE Use these buttons in Media Play (USB) and Anynet+ modes (: Controls recording on Samsung recorders that have the Anynet+ feature). Your TV has several screen size options, each designed to work best P. SIZE specific with types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. [. . . ]