User manual SAMSUNG PL50C450

[. . . ] Connect a Component Cable(Not supplied) between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT jacks on the Cable Box/Satellite receiver (Set-Top Box). AUDIO OUT jacks on the Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables(Not supplied) between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the Storing Channels Automatically 1 2 Press the MENU button to display the menu. [. . . ] Press the or button to select Channel, then press the ENTER button. Press the or button to select Auto Program, then press the ENTER button. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the EXIT button to exit. TV Channel Antenna : Air Auto Program Channel Manager Fine Tune Color System : Auto Move Enter Return · All available analog channels are automatically stored in memory. · It takes approximately 3 to 10 minutes to memorize channels. 2 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Poor picture quality. No picture or sound. No sound or sound is too low at maximum volume. A distorted picture appears in the If Just Scan is selected in some external devices, a distorted picture may corner of the screen. This symptom is caused by external devices, not the TV. This is caused by minor systems operation and is not a defect. The "Resets all settings to the This appears when you press and hold the EXIT button for a while. The default values" message appears. product settings are reset to the factory defaults. However, there may be few bright or dark pixels on the screen. These pixels will have no This Plasma panel uses a panel consisting of sub pixels (6, 220, 800) impact on the performance of the product. [. . . ] These pixels will have no This Plasma panel uses a panel consisting of sub pixels (6, 220, 800) impact on the performance of the product. which require sophisticated technology to produce. Try another channel. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc. ). [. . . ]