User manual SAMSUNG PL50C530

[. . . ] Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. [. . . ] This function is not available in the Just Scan mode. 1 To select the desired picture mode, follow the Activating Picture Options instructions numbers 1. You can select the sound mode to best suit the programming you're watching. Presstheorbuttontoselect Standard, Music, Movie, Speech, or Custom sound setting, then press the ENTER button. â· Movie : Provides the best sound for movies. â· Speech : Emphasizes voice over other sounds. â· Custom : Recalls your customized sound setting. The sound settings can be adjusted to suit your personal preference. Bandwidth Adjustment (100Hz, 00Hz, 1kHz, kHz, 10kHz) : To adjust the level of different bandwidth frequencies. If you make any changes to the Equalizer settings, the sound mode is automatically switched to the Custom mode. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. A blue screen is displayed when Child Lock is activated. "*" will appear next to the number of fine-tuned channels. Normally the TV can receive image and sound with good quality in Auto mode. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer or Video Card manufacturer. ) 1 2 4 First , click on Control Panel on the Windows start menu. When the control panel window appears, click on Appearance and Themes and a display dialog-box will appear. When the control panel window appears, click on Display and a display dialog-box will appear. navigate to the Settings tab on the display dialog-box. The correct size setting (resolution) Optimum : 1920 X 1080 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. [. . . ] Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position. You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons. If you adjust the positon after moving to a pre-set position, the position display will disappear. For installation, refer to the Installation Manual provided with the wall mount. [. . . ]